开云体育

Hello, I have detected and issue on the signal mast logic or at least I have the problem. It is related to turnouts that are connected. I have two turnouts that are directly connected one on closed

YAY my Ethernet shield showed up today!!……….now what? I have two groove 125khz sensors and an uno. I plan to buy more sensors in the near future. Can someone please provide a step per step for

Lawrence, DecoderPro is basically a very smart throttle connected to your DCC (or other) system. What matters is whether your DCC system and the decoder in question will play nicely together. If, for

You could simply "pool" all of your C/I tracks at that location.? Now if a certain destination C/I needs extra track space, it will steal it from the others.? This way your cars will be blocked by

Hello again, I currently have a yard where I have classification/interchange tracks set up by location, which works ok.? What I do find is that this restriction does reduce car movement, which is

Hi Dan/Pete, Makes total sense now.? Thank you for your help. -- Tom

couldn't he print the switch list without hitting the "move " button? I thought I printed a switch list just after I " built " the train. I can't test it now my computer is down and will be for a

Are you saying decoder pro has no issues with ANY brand sound decoder?

I had a look at the source code for turnout control (MarklinTurnout.java). Since my experience with the source code of JMRI is somewhat limited, I may be missing something, it does, however, look as

Andy, Please clarify your question about working with signals. Normal case the computer provides the logic to implement the signals so it knows what's happening. -Ken Cameron, Member JMRI Dev

Which decoders to buy has nothing to do with JMRI and your question should be taken to a general DCC forum. -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group

I'm looking to buy my first sound decoder installed N scale loco. I wanted to get recommendations for which decoder manufacturer to consider. I use Decoder Pro but have read that some sound decoders

Thanks, I will give that a try. I had thought maybe it was obvious but I am a bit of a beginner! Would the same think work with semaphore signals? regards Andy

Thanks to all! Allan

Getter frustrated trying to run warrants. I created several warrants and tested them through the editor auto run two or three time and they work perfectly. Save the warrant and the next time it is run

Andy, make If you have the Power Pro system box (not PowerCab, SB5, Twin) you can see those turnout operations. Add the turnout in JMRI and make sure the feedback mode is set for MONITORING. -Ken

Pete, The "receive" load in a schedule can also be blank. That allows all custom loads and default loads to be accepted by the spur if the option to accept all load names is also selected. So in

Andy, From: <https://www.jmri.org/help/en/package/jmri/jmrit/beantable/TurnoutTable.shtml> MONITORING Default for LocoNet Turnouts (and probably XpressNet soon), and available for NCE. When

Steve, Yeah, I agree. The debugging messages are still in there if you want to use them, but they kill the serial connection. They do work with the Ethernet connection though. They ARE sort of

MRFC522, Nano/Uno/Mega Serial/Etherner Tom Success at last! Well spotted! I have both the Serial and Network connections working in JMRI. Pity we had to lose the debugging messages, I found those