开云体育

From your build report: Find destinations for (ATSF 95561) type (Flatcar) load (E) at (Springfield Yard, B Yard T1 (T-567)) Route (T-567) id (98r8) no set outs at location (Shelbina) Searching

Hi Pete, I am so sorry for the confusion. I've uploaded what I believe are the correct Build Report and Manifest files for the Mina Turn. I did as you suggested and checked both East and West for the

Sorry I haven't gotten back sooner I have tried the suggestions that were offered on the last build report. It looks like I am still getting the same issue. so attached is a new build report.

Hi Tim, You are now well away from jmri, and I'd strongly advise you to join the wiring for dcc group (w4dccqa) in addition to this one. Wouter

Hi Perry, Do your Routes have sensors selected for "Sensor that Activates when all Route Turnouts are correctly aligned (optional)". That is how the JMRI WiThrottle Server decides to send a state

Good day, I have been studying this web page to figure out how to modify my Peco Electrfrog turnouts. Pretty straight forward. I have also been studying this youtube video.,.....

Hi: I started using my Android phone as a throttle, and saw that in the Engine Driver preferences I can access routes. However, all my routes show a status of "unknown," and when I select the route,

The total pool track length in this case would be 135'.? The program would only use that amount of track no matter now many industries were using the same physical track.? In this case, no more than

On the PanelPro side, look at https://www.jmri.org/help/en/html/apps/PanelPro/GettingStarted.shtml Dave Sand

Good morning Jeremy, Understanding JMRI.............. There are some very good videos on learning JMRI at youtube.com I would start with the videos by Larry Pucket AKA the DCC guy, His videos are very

I have one resistor per truck (47K) I use the inside axle, away from the coupler pocket for the reason that you describe. I like the surface mount resistors as they are very compact. I especially

Hi Dave, Funnily, when I edited the files after? I had saved them with .txt, it opened the GUI text editor. So, I thought it was all good.? However, I should have created the files in that text

Cliff, I have the code mostly ready, I'm trying to write up some "how to use" verbiage. I find that putting the system name info last, with a required delimiter, makes this much harder to explain. I

Thank you. -- Frank Kenny Central Pacific Railway - CPRX 310-344-9145 Los Angeles area Instagram: https://www.instagram.com/cprx.centralpacificrailway/?hl=en ( http://cprx.centralpacificrailway/

Good morning, thanks for all the good advice!! I stumbled upon these web pages and they are very good in figuring out what modifications need to be made and how to make them ?to the Peco ElectroFrog

I agree that having resistors on several axles is OK, however one must ensure that the resistor wheel set does not cause other problems Just last week while cleaning wheels and checking their gauge

Jeremy, If you do an application search for "text" you will get the default GUI text editor. I need to update the Linux install page. 1. Copy the ".desktop" file to ~/.local/share/applications.

What if the number of users is such that if each is given one 4

Thank you guys for helping me with this problem! Tim, they didn't appear in the square of icons. I agree with Dave and Robert about not using LibreOffice Writer, even with saving it as a .txt file.

Recheck your channel addresses. You might have a conflict with other devices. Loconet? Your addresses may have a conflict within JMRI. These conflicts could cause "momentary" appearance. Can you