开云体育

What determines the position and size of windows in jmri? At some point the positions and sizes were recorded. Now no matter how much I reposition and resize windows, saving using "store all tablets

Good morning, I am in the planning stages of my layout. I am currently trying to figure out where I need to place my "blocks". I am using all Digitrax hardware including a Digitrax BXP88 for power

Douwe, The send count option is only applicable to signal mast drivers that talk directly to the layout, such as the "DCC Signal Mast Decoder". Dave Sand

Thanks Tim. My decoders are not locked. I will lock them when I figure it out. Mark.

I followed this discussion and was triggered by the comment that you can set the number of 'send counts' to a mast. I know you can set that for a turnout, but for a mast I haven't been able to find

Since this is a decoder issue and not JMRI you should take your questions to the TCS group. /g/TCS-Users -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam

Good morning Mark, I have 3 TCS WOW-121 Steam Decoders. I think they are very similar. Sometimes hickups can happen on the rails and the decoders can sometimes interpret them as programming commands.

Hello group. I have a question about this decoder. I have 2 GP38's that are consisted together. I have not run these 2 locos for a week or so. --Today when I started to run this consist the locos ran

Steve, I have a jumpstart already on the PN532 version, so yes, we can tackle the Ethernet/Serial version of that one next! :-) Tom

Try only printing the 1st page when the printer popup window appears.? If that doesn't work, print to pdf, and only print the 1st page.

Thanks I went there but it won’t let me print just this page even though I select to print inly on this page. It will only print 16 pages, which includes all the train info for all trains listed. I

Gentlemen,?I wish to set up a team track.this track will have multiple industries.?my dilemma is, I wish to have each industry listed individually as far as set-out and pickups go.example,?team

Ethernet/Serial Tom I'll give that new version of the sketch a go when I get back from work tonight. If it is okay, which I'm sure it will be, then is it possible to modify it for the PN532 readers?

Tom Good, I thought that's how it worked. I would have thought we were half way there with the reader sketch. If it doesn't work, then at least I've got a spare Uno! Lol! Steve

Steve, No, you are completely correct in your summation of how the board works. It IS 2 boards in 1, operating exactly as you described. We can certainly give it a go though! :-) Tom

You should be able to. They’re DCC decoders so once set up, they should work on any DCC system. You just need to know the decoder’s address. Mick ________________________________ Mick

Tom Thanks for the revised sketch, I'll try that later. Steve

Tom Here was me thinking it might be an easier option! Lol! Interesting article though. Apart from the hassle programming it, it basically looks like two units on one board. From what I can see, the

Hi Pete, I've got the latest Mina Manifest and Build Report attached dated 4/30/23. I've been reading the Build Reports as you suggested and am beginning to understand however slowly how the program

MFRC522, Ethernet/Serial, Nano/Uno/Mega I caught another small error in my previous sketch. Here is the corrected sketch: *// Import Libraries* *#include <SPI.h>? ? ? ? ? ?// SPI library for