开云体育

Is this related to the TCS-Users thread at /g/TCS-Users/topic/98477162 ? It sounds like the decoder isn’t executing the reset, at least not in the way you’re expecting. The are

Thomas Just because you have the roster entry created, you are missing the second step of roster creation. Read all sheets. WHen you first create a toster entry, the data is filled with default data.

Good morning Bob, I am pretty sure it is TCS Decoder WOW Steam 121 SS4 (Sound Set 4). -Tim

JMRI has a bunch of WOW 121 models: WOWDiesel V5 121 WOW Diesel 121 SS2 WOW Diesel 121 SS3 WOW Diesel 121 SS4 WOW Diesel 121 SS4 Prime WOW Diesel 121 EMD WOW Sound 121 WOW Steam 121 SS4 Could you

Good morning, I believe there may be a possible bug in JMRI / DecoderPro when using a TCS WOW-121 Steam Decoder. I have the latest test release of JMRI running (5.3.5). I have a Digitrax DCS240+

Thanks Kevin. It’s OK now.

Wouter might be on to something. Are you trying to run the locomotive on the programming track? Some command stations can do that and some can't. Did you, in fact, put the locomotive on the layout

Mark yes. I ran into a problem, not manifested in the same way. Oracle was sitting there unbeknownst to me. Oracle uninstall app solved my problem. -- Ken NYNH&H, Old Colony Division, Cape Cod Branch

It didn’t show those above, I will double check and get back to you Mick. Thanks Duncan

Either will probably do. They’re actually LaisDCC decoders. It may well be that the two decoder choices both give the same response to JMRI when it interrogates them, which means it can’t tell

Hi Thomas, When you try to control your loco, what is the loco address you use, and how did you determine that that was the right one? From the story so far, I get the feeling that you are expecting

Blair wrote, " I thought that up to eight sockets could be used to plug the readers into. Then the seven wires from each reader can be easily routed to where they need to be. The question is, where do

Hi Joe, What version of DCC-EX are you running? You can Send a lower case?? s?? status which will display the version in the traffic monitor screen. The 303 error is saying you're attempting to

Hello Ken, When I perform "Add Loco" on decoder pro I can perform that decoder search function and it provides me with four of the Bachman decoders. I've added my Loco to the roster with all the

Pete, Thank you for your help. I am going to try your suggestion. I will report back if this works. I seem to be having all kinds of problems at the moment. Not only will my passenger trains build,

Steve G (and all) thanks for the assist. Unfortunately that did not work for me. The problem seemed to stem from the user account PATH.. so I just nuked the account and started fresh. I am now able

Steve, The WeMos D1 R2 also has two SPI buses: the hardware SPI bus (HSPI) and the software SPI bus (SSPI). For the WeMos D1 R2, the hardware SPI bus (HSPI) is connected to the following pins: SCK:

OK, so thanks for confirming the correct, working sketch for me. Now, I know that you wanted the same debugging functionality as in the Serial PN532 sketch, where the serial monitor tell you that

Tom Well, I really don't know what's happening today, I seem to get anything working much today! The Uno's seem to be connecting to the laptop, but they are not reading any tags at all, non of them!

To be clear, when you perform “Add Loco” with DecoderPro, JMRI presents you with a decoder selection that does not work when you accept the selection? -- Ken NYNH&H, Old Colony Division, Cape Cod