开云体育

Rummy, The BlockBoss errors are caused by leftover SSL definitions. The only official way to clear the errors is to delete the related signal head table entry. Since your signal masts are defined as

File moved to: /g/jmriusers/files/ProblemsBeingWorkedOn/rummy -- Peter Ulvestad *Think before you post, try to be positive, and you do not always have to give your opinion.....* JMRI

rummy@... added folder */ProblemsBeingWorkedOn/Ron Rumberger*

First let me reiterate: ?I really appreciate all you guys do to keep the rest of us moving along with JMRI! System Console: 2021-03-13 07:37:29,231 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ?

The following files have been uploaded to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/Phase 4b1d.xml ( /g/jmriusers/files/ProblemsBeingWorkedOn/Phase

Hi Steve Thanks for the information. Are there plans to address this scenario in the future? Is there any other way to accomplish this movement? Thanks again Phil

Hi Phil See /g/jmriusers/message/186054 for a better idea as FWD and REV means. You cannot change the direction of a locomotive in the middle of a transit. The FWD and REV are not

I have a train that pulls out the siding goes around the layout and is supposed to back into the same siding. I can get the train to pass the siding but will not reverse. The section before the

Rummy, A LRoute is actually a Logix. The LRoute table Add/Edit window provides an alternate GUI for creating the Logix. Any issues with LRoutes running are actually Logix issues. When you update the

Thank you steve but is there a command that I can write in a script to inform the system that I decided that this section is artificially allocated by myself and or desallocated. To change the status

See this link How to Run a Raspberry Pi Program on Startup - learn.sparkfun.com ( https://learn.sparkfun.com/tutorials/how-to-run-a-raspberry-pi-program-on-startup#method-2-autostart ) for auto-start.

Update on my problem: I “stored configuration and panel to file” (my working panel) under a different filename, and Quit PanelPro.??On reopening PanelPro and loading the new filename, I no

Hi The allocated section would have to be next section for another allocated train and that train would have to run thru the section to release it. To stop a train from allocating beyond a specified

Yes, I have used Steve Todd’s image, a couple of times. I went down the route I did because I was installing the MERG CANPiCAP and their software for it, so I followed a process from their site.

Hi Ken, Maybe this will help with the auto-start: /g/jmriusers/topic/31887732 Klaus Am 13.03.2021 um 12:38 schrieb Ken Bates via groups.io:

Have you tried the RPI image for JMRI from Steve Todd....that's an all in one that works when the pi is booted up

Hi, I have built a MERG CANPiCAP and bolted it onto my RPi 3B+. I used an image created by MERG, which worked okay. I then downloaded the latest JMRI for Linux straight to the RPi. I then downloaded

I have sent the session log direct to Dave Sand and Ken Cameron. Mike.

Look for errors in the JMRI System Console (Help => System Console). You can also upload the xml data file to the group's ProblemsBeingWorkedOn file folder and we can review it. Dave Sand

Just one more update. I have put together an Arduino based DCC Packet Sniffer, based on this code and design: https://wakwak2popo.wordpress.com/2020/12/11/dcc-sniffer/ which was a derivative of: