开云体育

Furthering Marc’s response: My recollection is that the SFX004 ‘Sound Bug’ was specifically designed as an add-on sound decoder for Digitrax motor decoders. There are ‘common’ CV’s

My info is as follows: Win 10 Pro Version 1909 Java 1.8.0_241(en) JMRI version 4.19.5ish Digitrax PR4 using Com port 3 Digitrax DCS100 ONLY as a command station Digitrax DB150 ONLY as a booster Layout

Howard, When the PR4 lights alternate Red/Green, that means that the PR4 is in "Ops programming mode". You will need to press the "ops" button to "exit ops mode". This is mentioned in the Digitrax

Howard, In my experience, Rich S's statement that "The Digitrax PR4 will only work on COM Port 3" _IS NOT TRUE_. My current JMRI configurations on a Windows machine show that I have successfully

I only use _staging_, _spurs_ and _C/I_tracks mainly because I don't have a good idea as how to use a _yard_ track. Is there a reference where I could better understand the role of a _yard_ track in

Managed to sort out the com port issue. the PR4 is now on Com4. and the MRC is still on Com 3.? which is a worry if there is a problem which I not seen yet as Rich in this thread as Rich has the

Basically you can’t, because it isn’t a single decoder. It’s two decoders and you will need to treat it as such. Mick ______________________________________ Mick

Phil, These are actually two decoders in one Lok. So you may need to program them separately. Look at the CV15/16 protocols. This is similar to the Blue Line Loks that has OEM sound, but required a

Please use "meaningful subject lines" when starting topics. We are getting lots of subject lines that don't give much if any idea of what the topic is about. By providing a meaningful subject line

I think, now there were two entries. One for motor decoder one for sound. They shared a common address, this the locking step to program and/or read each one. Then again reading was often problematic

I use it for the real life builder. It’s free form I suspect unless you belong to a club, which might have specific uses for each field. Christopher See -- 1976 R90/6 disguised as an S 2015

Single roster entry would also mean you can't reliably read back values anymore - two decoders on the program track... which would you expect to respond? Wouter

Decoder manufacturer, even.

Do you mean recognized as a single address or do you mean as a single Roster entry ? Single Roster?? is a tad complicated and would require you create a custom? 'Definition file' combining both

In the days of the BLI blue line locos the approach was to lock the sound decoder and program the motor decoder. Then reverse the process. That way any overlapping functions would remain uniquely set.

Interesting question that I have never seen before: combining two decoders into one definition file and subsequently a single roster entry. Could be done as these decoder do have a series of shared

Haven’t had much chance to play with it but the new volume sliders work great. Thanks. Also been playing with ‘spatial sound’ but it’s making my brain sweat. -- Mike Heintzman Modeling the

I see a lot of the issue with separate detection at turnouts depends on what are the goals of the layout and signaling. Next you get into the track plan itself, that has quite a bit of impact

I think manufacter refers to the model manufactor not the train manufactor. but am I putting the correct info in the columns? /g/jmriusers/photo/246752/0?p=Created,,,20,2,0,0

Don’t know if this helps, but it was a prior discussion on how to set up dual decoders. I went into the 开云体育 site and searched the messages for ‘dual