开云体育

The sensors are working as the lines change colour as the train travels around the loop. This all started as I was originally trying to get a second train to stop in the block before it runs into the

Bob, Pull request #8092 has been created to fix this issue. For now, the work around is to edit the panel xml file and replace the short entry with a valid set. During testing I ran into an issue with

OK. I opened PanelPro and looked at blocks and noticed they were LB ( in Help) or IB? from there I assumed that might be his problem why his engine is not stopping as expected. Me wrong. Marc

Dave, thanks a ton for the response. Tried separate cables, and tried all ports. Still not luck, same symptoms. Kept searching far and wide and found an old thread where the connector boards for the

Marc, Blocks are always internal. Blocks derive their occupancy state from assigned sensors. Dave Sand

Phil,? I see you posted you attachement as a Photo in Photos IB are internal blocks, and I believe? not physical blocks on the layout or test track.? So you must trip these manually unless the IB1,

Cleaning the track before doing any programming is a recommended. The small currents, time factors and small contact patches involved require perfect conditions. But " error reading " is totally

Thanks to all. ?I had copied a 20 Loco roster from Dec. Pro 4.10 to a newer computer running 4.18. I just wanted to "Read from the Decoder" to confirm that this version was working well for me. I

I concur, I have Windows 10 and never let it go into sleep mode while JMRi is running or at all, and always shut down JMRI when leaving computer for any length of time. I have had terrible things

PJ, You have not given us anything to work with, but one common issue is that Windows will disconnect the serial ports if it goes to sleep. JMRI does not know how to get them going again when Windows

/On 2/8/2020 9:17 AM, PJ via Groups.Io wrote:// / ??? If everything is identical on both computers I would blame the computer! -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr

Hi Phil, It is an older Acer laptop with Windows 10 Home installed. The default printer is shown as the TS6120.?? The same port is being used for all the printer jobs. I just selected preview,

Thanks Dennis, I didn't realize the DS and Clerk were in two different locales around here we don't have the luxury of having that many operators. If we can get the feature without it being mandatory

By stalling I mean it freezes. I put the mouse on a switch to turn it and nothing happens. I try to bring the main menu up to shut down and nothing happen. I have to shut the computer down wait 10 or

Yes I agree, too many variables, too? vague,? and not really a JMRI issue. Marc

Other possible is do not try the update while there is a running copy of JMRI or you will get this message. A? anti-virus app has a "quarantine" where downloaded, un-trusted apps, are placed.? Find

Thank you

Attachments are not allowed. You can create a folder within the "Problems Being Worked On" folder of the files section and upload your attachment there. -- Peter Ulvestad JMRI Users Group Moderator -

I am a new user. The train instruction below should have train 10 move from block 1 to block 3 and reverse to block one correct? Because it just continued around my test loop. What am I missing. Sent

Maybe try to run? the installation as administrator?