开云体育

I believe you are missing my point. I am running a small terminal layout and as such will from time to time receive a specialty load for a specific industry..I am not interested in establishing a

Got it, thanks. Ken

Thank you. ?

PPS -? I must be getting old, I missed the other query above. When I unplug the USB lead, COM2 disappears from device manager then re-appears when I plug it back in.

If I decide to "try" it I'll make it 100% "opt-in" (meaning unless you opt-in you'll never know it's there). I've been working with the developer of RailModeller Pro on his JMRI export and one of the

Just updated to 4.18. Modeling German modern day in N. Have been setting up Signal Masts with the DB-HV-1969. Discovered that I could no longer set a "dark" signal aspect from ?the Signal Mast table.

Just a thought to maybe focus messages better for people needing help. When someone says "I bought this and tried to install but...", I think people who want to help should answer his/her concerns

SwissChris, Please post your panel file (and any custom items needed for it) and I'll create an issue. Or you can create an issue here: https://github.com/JMRI/JMRI/issues (

Graeme, How did you "upgrade" JMRI? And what operating system are you running JMRI on? Also, this problem is coming from the JMRI webserver, not EngineDriver, so please browse to it using a browser on

Roy, There is just one big rule, always have the USB unit running before you start JMRI. If you do not, then JMRI can not start due to a missing COM port. It is a Windows thing. Most folks just leave

Please create an issue for it here: https://github.com/JMRI/JMRI/issues Include the panel file, your icon folder, and your screenshots. I'd also include a link back to this thread as a reference for

One of the issues Jeff ran into when using the alternate track feature, was using the planned pickups for the spur that also needed an alternate track.? The combination of the alternate track feature

Rpi 3 DCC++ JMRI 4.18 from 4.16 Previously running JMRI 4.16 Engine Driver v2.24.93 on Samsung Galaxy S2 Panel startup with Webserver and WiThrottle Server Engine Driver loads, panel loads and

PS I also compared the device manager settings for COM2 with the decoder pro settings - Baud rate, flow control settings etc. all matched up.

Hi there - I've managed to get the device manager information and had a second attempt at reading the CV's using the same method as before. I got the same results, but watching closely what was

When I was having problems, I switched from an older TrippLite Keyspan to the RRCirKits cable, the UN8-BE, and it was very trouble free. The problem that I was having with the TrippLite Keyspan was

As an absolute beginner I have followed this thread with great interest and I did initially have a problem with downloading the drivers, however my son in law who is conversant with that sort of stuff

Get the TrippLite Keyspann.? You won't have an issue although I have had to cut off the plastic hood aournd the DB-9 connector to allow it to connect to NCE command stations.

Thanks Steve I changed the preferences and yes I can now see the icons but the performance is a little slower.? Do you know if the?"slipturnouticon" issue in the webserver is being worked on for a

Running JMRI 4.18+R37ad3do Windows 10 Pro Browser Google Chrome Version 79.0.3945.88 (Official Build) (64-bit) Java 8.0.2310.11 I've been trying to set up webserver and finally succeeded, but I'm