开云体育

The System Console log is available in several locations. Probably the simplest? under HELP,? System Console.? use the "copy to clipboard"?? and the paste to this tread of yours. Marc

I see that you are asking for the 'console log' information.? Let me know where to find that, and I will gladly pass it along. Thanks Kerry

I'm fiddling with a Loksound 5 decoder, with DecoderPro. I've run in to an issue while doing so that leaves the decoder bricked, requiring a factory reset to get out of it. Specifically the

Making some progress on this. Turns out m emories can store various object types, so the panel display logic handles each type individually. Most are easily converted to a string, but one of the types

I don't remember what I updated from, but I went to 4.16 production version. I updated to JMRI 4.17.6, but I still have the same issues. For reference, Java version is 1.8.0_231. Thanks Kerry

This is usually a problem that when you start your system all the feedback sensors will be shown as 'Unknown' and this is taken as 'Occupied' for the benefit of setting signal logic and LOGIX. As soon

Steve, I have identified a possible cause for the unexpected CBUS validation. There is a listener left when the first Add window is closed which is triggered when Add is selected again. When CBUS is

On 3rd October 2017 a topic was started on Advanced Consists (#140322) which describes the problem I am having with trying to set up a 'Consist' using a Sprog II. I far as I can see, the previous

Someone once stated the TSU2 and ECO would alternate a pulse forward/backward to remain at same spot during programming in Service mode,. The decoder must issue a pulse (ACK) , might not move the

Leo, You'll ned to bring Java up to at least 1.8 first. It's no go with 1.6 for the newer versions of JMRI. Wouter

Worth noting that Tsunami-2 decoders don’t pulse the motor to generate an ack pulse. They don’t move or even twitch when programming. I’ve done upwards of 200 TSU-2 decoders with DecoderPro,

Steve and Dave, I loaded JMRI Version 4.17.6, but the error still occurred. I can now repeatedly, at will, cause the error, or run without the error. I also tried running with the MERG Can

We use PanelPro for our dispatch/detection and I’ve noticed if someone views the webserver on their phone or tablet the dispatch screen goes to a whiteish looking screen. Like when an application

15 minutes before you sent this message, groups.io reported you were no longer bouncing. From groups.io Help: Bounce A bounce happens when an email message cannot be delivered. Possible reasons

Hello J am using JMRI in France and it's an very beautiful soft I have two questions to submit to you *First point:* As you say in the documentation, the dispatcher works perfectly with a single

Thank you all for the suggestions and help. I found out that the file we have in possession currently, last access was in 2012. We do not have the latest version of the file, but we do know that JMRI

Another item that might be affecting the ACK pulse is the use of a 12V power supply (your wallwart). 12V could be at lower limit power, programming wise . With the Digitrax PR3 we were adding higher

Testing? via PRIVATE Email via Groups.io . If this mail gets thru to you, then Groups.io has the proper Email address for you. Marc

Hi Andy, Thanks for reporting, have been able to reproduce the same exception. Will need to do a bit of digging around why any sort of Internal Sensor validation is going via CBUS Sensor

Thank you Dave and Marc.? Somehow some of my replies aren't coming through on this forum.? I've made the changes to Preferences.? The Tool Tips are helpful.? Unfortunately, I'm still getting the