开云体育

But cars need to be *going somewhere* to be properly sorted in a classification yard to get onto outgoing trains. His train is terminating in staging with cars that are going "off layout". The issue

That is what my yard has, classification tracks set as such in the program. That is how I have some tracks with routes so the cars get put in them. I left a couple with no destination just so the cars

Dave, Ken, Thanks for all of the info and help. Since this is my first venture into Logix, I expected some bumps.? The one Logix in the Dogbone file was a suggestion from Bob Bucklew to my friend on

I have since installed the decoder into the loco(older Genesis SD75I) and am still experiencing the same issues.? The unit is on the test track and even though the sound level adjustments actually

Kirk, If I had to do some guessing, I would wonder whether one of the DCS50 "Jump" throttles got assigned to a loco, and that this loco is (still) associated with slot 6... Have you tried to

Richard, Yup, all that works. In the instructions it is suggested it might be easier pre program before installation. We have about ten programmed using the NCE cab. Getting the normal and reverse to

Perhaps I misunderstand your question but if you want to set a dcc address for the Smail my understanding is it is programmed in a similar way to a light-It decoder. There is a program button on the

It does work sequentially. What is being suggested is a mechanism for setting a multi-level sort at once, such as the Excel sort dialog. As the original poster noted, this would be an enhancement, not

I posted this question a few days ago and haven’t gotten any input so I’m adding some more information. I am able to print from other applications. I am having the same problem on two rpis, a pi3b

Randall, Matt: Got to try my Pi4 running Buster and yes the same process I used on the Mac now works on the Pi. So now I need to update the Pi3 and see if Buster works the same there... Video

Ross, You might want to consider making your yard a classification yard.? That way cars dropped off to your yard would be sorted by departing

Dave, Thanks. I am thinking I could use the NMRA listing that shows all the CV's Rick.

Rick and Jan, A quick look at the SMAIL documentation and the supported CVs indicates it's definitely not based on the NCE Light-It. It may be based on the NCE Switch-It, but I haven't checked

It’s intended to be a sequential sort: If you want to sorted by road number within groups by owner, you just do that: Sort by road number, then sort by owner. Does that not work in some

I was browsing the JMRI DecoderIndex.xml and it has? HAG Modelleisenbanh AG as Manufacturer ID 81.. NMRA? Manufacturer ID? dated 2019 shows it to be 82. That is more or less important as there are

I agree that would be very helpful. The current ‘single key sort’ is not always adequate.

Kirk, try updating to 4.16 (or wait approx. five weeks and try 4.18). There have been quite a few improvements to Loconet throttle handling / stealing since 4.14 (most already from 4.12 to 4.14, but

Jim, I have both Cab1L and Cab2L on my bench and know how the programming works. You will continue to argue that it works until you get a Cab2L system. Then you will see that it works "Better" when

I have what I consider a medium-sized, primarily switching focused layout (about 14'x15' plus 2 6-track staging yards in another room) with about 10 trains on the schedule. In my case, as a lone wolf,

Bill, Thanks. Rick.