开云体育

I have PanelPro running on an old PC with Windows XP and an MS100 connector to my DCS51 Zephyr controller. To operate my turnouts I just click the mouse on the turnout in the displayed panel. All

Nigel, just had a look and a fiddle and the servos are now working correctly. Thanks for your advice

Carrs, The other comment I'd make is that baud rate setting issues in 4.16 could be the problem you saw there. Using 4.17.4 would be a good choice for trying 'current' JMRI developments. It fixed the

Conrad, Stephen, Am 26.10.2019 um 16:46 schrieb conrad: Right, the sound shut down should not happen just because the train has stopped. I updated the engine auto-start functionality of VSDecoder in

Being a cheapskate, ballast that came anywhere near what I wanted happened to be the local lake beach sand, sifted, but as I discovered full of metal particles. My solution at the time was to run the

carrs, Simply waiting for the 4.18 is certainly not going to fix your problem. As far as I know, no one else has reported the same problem so there's nothing we as developers can do until we have

I've found enough motors and speakers 'clouded' by magnetic particles to say 'avoid'! On the cone of a speaker, it kills the sounds by adding weight to the moving parts. For motors, it tends to find a

Stick the two probes of an ohm meter into the jar.? Compress the ballast.? If you get any reading other than infinite I would discard the idea of using that ballast.? As far as I know, only ferrous

I have taken jmri? completely off my computer and went back and installed version 4.12.1 and every thing works like it should I can program, speed match etc. I then tried to reload 4.16 and I then

Paul, I did some more checking and found the file name of the xml file storing the id tags has changed. In 4.14 it was "PanelProIdTags.xml. In 4.16 a file named "PanelProTranspondingTags.xml is

Hi Nigel, thanks for the reply. I have also posted in the NCEforum, just trying to cover all bases as I'm so new to this. Having reread the manual I think you are correct about simple mode. As I am

Dave I am trying to use the best approach to creating signalling and was steered to using masts instead of heads on MERG and this is where I started. I was provided the methodology of creating a

Thanks Bob. I'll try and get this downloaded in the next day or two. Cheers, Dennis Drury Dayton, NV The miracle is this: the more we share the more we have. Leonard Nimoy

My previous posts on notching got me interested in prototypical diesel/electric operation.? I knew that Digitrax's sound decoders have three notch modes: auto, semi-auto and manual. But now I see

This sounds like a NCE to Megapoints issue, not really JMRI. So, you ought to take it up with those companies, or the support forums for those items. The setup should work, I’m working on a layout

Peter, The signal heads are on the panel for debugging purposes. As the SD2 virtual mast changes, the SD7-SD9 heads should also change. If they change on the panel, but the physical heads on the

This is now in the development builds (I.e. http://builds.jmri.org/jenkins/job/Development/job/Packages/ ) and will be in JMRI 4.17.5 (which is due out sometime soon) Running the

Hi Dave I carried out the steps in the following order. Removed the two new .py scripts from the startup menu. Re-started JMRI. Loaded your new panel file. Ran the gantry.py script. Tested the setup.

Jim: What happens when you spread some ballast and run a magnet over it resting a few mm above the tops of the rails? I ask because magnetic field strengths vary greatly and there will be some

Had a Google and unable to find how to set the Windows 10 Firewall rules for?Engine Driver App on Android So, this is what worked for me; Open settings (in Windows) Click on Update & Security Click