开云体育

Peter, The startup sequence in the profile that I uploaded has 3 steps. 1. I always load the JMRI System Console first. A review of the console window after startup helps with finding obscure issues.

Thanks Stephen, nice to hear from a prototype operator. Conrad

Klaus, Dave, Stephen and Charles, Thanks for all the help.? I've played with notch setting both ways - Idle sound just at idle and idle both at idle & notch 1.? Seems like the latter is more

Remember that it is the board number that you address, not the sensor number so board number 1 addresses sensors 1-16 Off hand I think my boards start at no 7 which means the sensor addresses are 97

I think this is the page you should be looking for to deal with the CVs https://www.jmri.org/help/en/html/hardware/loconet/Addressing.shtml

The BDL168 uses current flow to detect occupancy so will not be affected by any magnetic material in your ballast.? However, your other concerns about the magnetic properties need to be addressed for

If you want to complicate things further, some EMD locomotives are equipped with "Switcher Mode." This may be turned on by a simple bat handle toggle switch somewhere on the control stand, or may be

Hi all, brand new to JMRI and DCC so trying to get my head around things. I have an NCE powecab with usb module setup on a test track and have that working correctly, also using Megapoints DCC module

Hi.? ?Yes there is only one command station the?PR4 is the USB to LocoNet Interface with the PC.? I have the MRC and point/turnouts system connected on coms port 3 of the PC with the? MRC 0001515

Thanks, have ordered the diods and resitor.

I have a question that while on the surface it may seem off-topic but this is the only forum that I feel I can get a knowledgeable answer. I am a Digitrax user and as funds become available, I am

Good morning Dave Sorry for the delay in replying, didn't get back until 0200 Friday. I have run through your modified panel. I modified the original startup files as can be seen here (

follow the link provided and download the .EXE file as it is the Windows version of JMRI 4.17.5 ...? Jenkins builds are one step before a JMRI Test Release. Be aware that your Anti-VIrus app may flag

I have a Gaugemaster (MRC) Prodigy 2 and what I did was to make a virtual ground using 2 diodes on the track output of the Prodigy, feeding into the then feed them into a 1k? resistor.? For the

Ken, This whole discussion is my fault and the results of my laziness. Instead of doing it myself I wanted the easy way and have someone tell me the answers. It turned out for the better because it

Howard, I am assuming that the MRC Elite is the "command"? station that you use to control the trains also for controlling the turnouts. The BDL168 needs a Loconet which you? have attached at PR4.?

Being new to this what do I download from the Jenkins page there are a number of different items that I do not understand. I Thank you for your help in this matter.

My view is that some of the things that may come from this and later LCC will expand the flexibility of the throttle concept. My thought that currently it only has one variable value (speed) is one

I am sure there will be a reference to this.? But in what I read I am struggling to understand some of the terminology. I have an MRC elite with wireless connection on Com Port 3 to my turnouts which

Dave, The users interface is the throttle. The throttle in JMRI is written for TMCC-1. The foundation is there, the coding needs to be added to support the command structure of TMCC-2. I have