开云体育

Hi Steve, Thanks for the reply. But I think the fixes you suggest are beyond my limited novice capabilities. Note that everything works exactly as it should, including click position on the lists, if

Bob, The "new" DecoderPro3 is just a different "look" and accesses the same underlying code as the legacy DecoderPro interface. Like you, I much prefer the legacy interface and have created an icon to

I've done something similar, using google drive, but separate spaces, incase of corruption, and to avoid file lock problems. You can add to the startup "add action" -> "Rebuild Roster" to one or both

It seems the original problem is that the heads where reversed from how you wished them displayed. In a stupid-but-works solution, rotate the mast 180 degrees on screen (you'll need to wire it

Good afternoon, I've been messing around with the Generic Steam profile to try to align it a bit better with loco behaviour and by and large it isn't going too badly. I've removed a couple of the top

Hi Marc, Charles, Dave H, Andrew & Michael Marc, thanks for going to the trouble to test the AVG then itemise the steps to get the latest download into my Windows 7 Laptop. I still needed to “phone

David, The /frame server does not handle embedded windows properly. The click positions do not take the "offsets" of parent widgets into account, so the clicks are off by the header depth, etc. I see

Hello everyone, We ( www.slhrs.org ( http://www.slhrs.org ) ) have been running PanelPro / DecoderPro on networked computers.? One of the computers (SLHRS-Cab) runs PanelPro and is interfaced with

That changed a long time ago. If you are really intent on having the old look use the PanelPro startup. You could add buttons to the screen by changing your preference or just access DP features from

Thanks Graeme, That worked Mike

All, I am new to this group, but have been using JMRI for quite a few years. To get right to it, when I started with JMRI I was using ver 1.xx. I would open Decoder Pro and get a screen which said

I have taken this problem as far as I can. I have duplicated Gerry's results. I can control all my locos with the JMRI monitor "vthrottle" if I change it to 28 speed step mode from 128. But, I can't

After a long absence I am once more having a stab at getting my custom GUI to work on an Android tablet using the JMRI webserver. I have some success but am now stuck. I am using something like the

/On 9/24/2019 9:36 AM, forfoum@... wrote:// / Marc, ??? See _I suggested_ it was a cockpit error.? Tested and it works just fine.? Thanks guys! -- Jon Miller For me time stopped in 1941

/On 9/24/2019 9:03 AM, Bob Jacobsen wrote:// / ? To many. ??? This worked OK.? Curious why the other doesn't. -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, SPROG, JMRI

Not sure why that doesn’t work. I just tried it and it seems OK, but of course that doesn’t help you. You can export the individual roster entries and them import them, if there aren’t too many.

*Bob,* *??? I tried to do this just to see but didn't seem to work.* *Opened a window save and save in ("Export Complete Roster").? Selected "removable disk (E:)" and clicked save. Nothing

Bob, I'm confused. Sleeping on it didn't help..... Your analysis is clear, except for one thing. You seem to be saying when Gerry set the screen throttle to 28 speed steps the message was in 128 step

Hi Marc,Thanks for the info, however I'm still having problems. When I try to install 401704(and 4.17.3 for that matter) I get the following Windows notice: Windows cannot access the specified device,

I recently had the same problem. Just two wrong user clicks and user has problems. This is an application error and should be fixed. -- Petr ?ídlo Czech Republic