开云体育

Thank you very much for the help. I feel a little silly about using the wrong parser :) When I used the name, I got a real small text not in the place I wanted. I have starter to create text boxes in

Following up on a previous thread about 'distributed' computing power... Win 10 Acerpc (4.17.3) talking to a Win 10 NUC (4.16).? The NUC is directly connected to the DCS240 and has the layout in a

Thanks for all the input Group Dave, my apologies for not answering your earlier question.? As far as I can recall, the CVs that fail are random.? I clean my programming track and loco wheels with

Marc, Correct. Only if they weren't loaded correctly by the OEM, retailer, end-user with LokProgrammer. That's not the reason. There are several reasons: - Some panes (such as the Function Map) are

Tim, I always do. I did ask you before whether the CV numbers that fail are: - Consistently the same? Can indicate that the CV is not supported by your decoder. - Random? Usually a sign of poor track

So Dave, should I continue to try reading all CVs when I get a new (non ESU) locomotive? I’m just concerned I’m somehow altering what’s in there (example getting wrong addresses, Vhigh values,

Marc, We can't guarantee the accuracy of JMRI defaults for any decoder definition. We only go by what is published, which is not always accurate. Even if one of us has an actual sample of the decoder,

Tim, Preferences->Roster->Programmer. Dave in Australia

Am 13.09.2019 um 21:19 schrieb Stephen Bartlett via Groups.Io: If you have running DecoderPro, there is a possibility to change to PanelPro: navigate to the File dropdown list, then select Open

Thank you, I will try these. Ken

Re the discussion quoted below: I do not find a Debug dropdown list on my installation of Decoder Pro It appears in PanelPro, and lets me click on Virtual sound Decoder and then VSD Manager. But then

also, how long should JMRI take to read a decoder and the CV's? Thanks again

Marc, Both the sys-7 (main track) and sys-8 (program track) settings are at 009, therefore cabs 1-9 can program on the program and main tracks. Then my interface should be able to program. Am I

Thanks Mike, good to know someone else has the same setup working.? I have no idea where "Read after Write" is enabled or disabled, couldn't find it going through preferences, comprehensive

My JMRI version 4.17.1 is configured for my Roco Z21 command station and the latter is configured to send both CAN and (emulated) LocoNet feed-back messages back to JMRI. As I understand, the 'CAN

Marc, Thanks for help. I have set the JMRI cab to 2. As for the LAST CAB issue, that is next on the list. I also am wondering if the "master cab", #1 is only allowed to program. I am going to try

Ken, This is partially correct.? We do still need to periodically broadcast a time event so that time clients that are tracking the progression of time internally do not accumulate time drift away

On my last layout I used NCE for train control and had a stand-alone LocoNET for other things. On the current layout I still use NCE but have made the jump to LCC. Tim Rumph Lancaster, SC

Perry, I think you have it correct, now.? CATS is an add-on to JMRI.? The turnout and sensor tables can be created in PanelPro (JMRI).? CATS is used to as an alternative to Layout Editor or Panel

My understanding of the design was not to broadcast events that were not being listened for. The ideal was to save traffic that wasn't needed. The result is any client must support the protocol for