开云体育

I think this is consistent with what other users have said about the DR5000. Unfortunately, I have never seen any documentation that clearly states what has been made available over each of the

John, It is true that the LZV200 runs on software version 3.8, but that is not what we are looking at to determine the command station type. There is an instruction we send to ask the command station

I am a bit confused over the entire thing about Java. Where i the best place to go for essentials.? Specifically I see there are two locations for the same Java execution files, installed on different

OK Here is the console log2019-09-11 22:07:33,600 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path scripts: is M:\Program Files (x86)\JMRI\jython\ [main] 2019-09-11 22:07:34,383

Cheers Peter - looks like it's behaving now. Best regards, Matt H

Clicking on check for updates shows: Most recent production release: 4.16 Most recent test release: 4.17.4 You have: 4.17.4+Rbf0d1af -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org

Oh, also all my read errors have been No acknowledge from locomotive (308), and I'm using Direct Byte programming mode.

An update to all who gave some advice, Ken, I don't know whether it was the reboot or the "run as administrator" that did it, but I'm now running build 4.17.4 on my windows 10 laptop.? Thank you

Hi, If I understood things correctly at SLC, the only time the 'clock' sends events is if it has seen a 'request' for that event during the initialization. A request meaning that some consumer was

Now updated. @John K - can you verify that this now behaves for you? Thanks for the report. Best regards, Matt H

I am out right now. I will place the whole log into a reply as soon as I get back home est 2.5 hours

Re installed the drivers like you said and tried the new version a few different errors. Here is my log at 19200 baud rate 2019-09-12 14:04:54,629 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ?

Nom, I wrote the OpenMRN C++ implementation for both the time server and client for OpenLCB.? I haven't messed with it in a little while, but I'll have a more detailed look at it again over the

I've got a rewrite rule that should resolve this and allow this specific URL to still be available at the non-https location - will add this to the server later. The remainder of the site pages will

The driver says it is working properly and i am 100% sure it the correct Com Port. I ran the installer twice and my computer has not updated. I have not seen a "timeout flushes receive buffer"

That should be https://www.jmri.org/releaselist as that's now the canonical form. Non-https and non-www issue a redirect in response to any request and, I surmise, apps.CheckForUpdateAction is unable

Marc, I was able to read the decoder with the DCC system on a program track. I am going to try to get the next release of JMRI, i was getting the antivirius software blocking it. the Error I get when

Perry, There is no style sheet, so you are not missing anything. I received the sample XML file that you created.? It loaded fine for me in both designer and CATS (JMRI versions 4.12 and 4.15, which

Klaus, Thanks for the "Horn1".? must have missed it on original file.? found your change when jmri gave a missing <mid-file> file error msg. sent you, to VSD subfolder, my very latest

Looks like it’s in apps.CheckForUpdateAction There’s a http://jmri.org/releaselist URL there, but changing it to https://jmri.org/releaselist doesn’t fix this: [java] 2019-09-12 06:53:22,264