开云体育

Bought from Legomanbiffo. Installed all 3 in locos, programmed just the address and they worked OK. Swapped the speaker over and now not working. I was using latest Production version. I've just

mcdougle1979, Have you possibly set your DCC system to send 14 2peed-step commands to this locomotive address? What DCC system (and what throttle) are you using? Ross Sent: Saturday, September 7,

mcdougle1979, Who loaded the Sound File into the decoders? 1) Did you do it yourself using LokProgrammer. 2) Did you buy it from a vendor who had preprogrammed it? 3) ESU does not load sound Files

Installed and tested v5 decoders. Seemed to be working ok. Changed the speakers over, now the deciders are misbehaving. They only respond in6 14 speed steps - anything above step 14 brings the loco to

If it is old enough, it may not support anything but the standard NMRA registers. Try reading register 1 in register mode. I have a couple of old decoders I have to do this with. Paul

Roger, friends, This topic is GREAT. I have one small suggestion. I "occasionally" help others build and modify panels . One major problem is that when custom icons are used, and an xml file is sent

Thanks so much Dave for spending time on this. I will try it out over the weekend! Dave B

All, Thank you for the replies. I have successfully update my UR-92 using the Digitrax S/W and Locobuffer. I believe the correct baud rate is 57600 (the only option some of the Digitrax programs

Roger, Yes, same deal with custom icons etc..., keep them in the user directories. The idea is you repeat the same tree as the production content and most of the tools know to look for them there in

Thanks bob! Roger

??? I have a very very early decoder I have lost the instructions to.? ? The only ID I have is the sticker on the chip.? It reads; MELEC TL2054 ??? It may or may not be a sound decoder so

Although it’s perfectly fine for people to run their own modified scripts, it’s also nice to have ones that do what people want. So I’ve added a jython/SetUnknownTurnoutsClosed.py script that

Conrad, I repeat your points from the referenced posting and put my answers below. explicit copyright disclaimer, something akin to the open source licence with JMRI, etc. All of my work is for

Suggestion for Steve Todd - It would probably be helpful to many users if you were to post a new image with the most recent changes to Raspian Buster applied. Yesterday I was working with a friend

To all: We'll be off babysitting all day.? If this was not the correct way to start a new post, feel free to edit/delete or add. Conrad

I'm working on creating VSD files using the wav files from ZIMO.? see referenced post: /g/jmriusers/message/163579 Conrad PS hopefully this is how one starts a new topic

Ken, Thanks for the tip.? Does this also apply for those oddball panel icons too? Roger

There is also the method `validateSystemNameFormat` that can be used: name = [...get from external program...] try: sensors.validateSystemNameFormat(name) except

Roger, Once you put it in the 'user' area, upgrades will not touch it. You can forget all about it. Wouter wrote:

Am 06.09.2019 um 00:35 schrieb conrad: Conrad, Right, that's obviously a new topic and I recommend to start a new one. There you can reference to the your last posting with