开云体育

Martin, It sounds to me that you have a block boundary issue. You wrote “both inputs”, a turnout normally has 3. One for the points end and one each for the straight and diverging legs. Keep

When you first start JMRI, what status are all the sensors? I'm suspecting that they are 'unknown', so all the signals are red as they fail-safe worst case, to occupied. If this is your case,

Thanks to all for the suggestions. I Will give them a try and report back. Don

I think I’ll wait a few more days before deciding that nobody needs that order to be preserved, just in case people are staying off email over the long weekend in the US. (Which is probably a good

Martin You just need to add the double head mast at the entry to the turnout, and you can add two signalmast logic pairs from that mast to the next signals along. The logic will know which aspect to

Errol, Which version of JMRI? Dick :)

I don't really care. You can take the lack of response as either people don't care or it's the long weekend and few are watching emails or the list website. -- Peter Ulvestad JMRI Users Group

Thanks Dave, My limited understanding of Layout editor shows. I was under the uninformed impression that layout editor required interconnections of the various icons to form links between components

if you use a single mast at a switch that has both continuing and diverging (two heads) how do you tell the ‘add at turnout’ right click to use it? ?Seems you cannot use the same mast in both

I recently installed JMRI on my laptop running Windows 7.? I was able to upload the roster from my main computer to the laptop no problem.? But I am unable to do any programming from the laptop, I

Nick, Separate panels are no longer required. Layout Editor can use all of the same panel, lever and indicator icons as Panel Editor and provide the track connectivity. See

/On 9/2/2019 10:10 AM, forfoum@... wrote:// / ??? Also one needs to understand how TCS updates.? For example I am currently working on (in my decoder box) a T1.? It could have many

Wayne, There are some good videos on Youtube but you might get more from using one of the step-by-step clinics. They have links one the JMRI website or rr-cirkits,com also has his clinics on his

Everyone, Can someone give me a general list of shortcomings of a NCE PowerPro system hooked to JMRI via the RS-232 serial interface? Things that you cannot do compared to other systems for

/On 9/2/2019 8:16 AM, rockpizza09 wrote:// / ??? Personally I use the latest test release (currently 4.17.3) as they come out.? I use only DecoderPro and if there are changes or problems with that

Steve, You will need two I/O ports, one for output (touch) and the other for input. (color) The MotorMan only has one aux I/O, so you would need two MotorMan boards. The TowerMan has two I/O ports so

Am 02.09.2019 um 16:13 schrieb conradandrose: Conrad, Please try it again. I could upload (and "Add") a VSD file. The upload takes a minute or so, VSD files can get large. Regards, Klaus

Peter, I have uploaded a modified xml file that works with 4.16 (and 4.17.3): 7July2016 DS.xml </g/jmriusers/files/ProblemsBeingWorkedOn/dsand/7July2016%20DS.xml> Changes: Renamed

Thanks Dick. I do have Digitrax. Sounds like I better skip 4.16. Rock Sent: Monday, September 02, 2019 10:34 AM To: [email protected] Subject: Re: [jmriusers] Current Version?

Rocco, 4.16 is indeed newer than 4.6, (many years newer) but be aware that 4.16 has a serious bug in the default baud rate setting area. (It affects CMRI, Digitrax, and possibly other interfaces) You