开云体育

Searching within eBay for "ho dcc sound decoder with speaker for proto 2000" hits a bunch of these with different form factors. All about $30-$40. Going back to my original question, does JMRI

Thank you, Wouter, for your intervention. However, the topic may be closed now as far as I am concerned. Bob, Paul, You should have left me in ignorance, a bliss. The more I have learned on the

Hmm, different seller to the previous item number, and it is a different item to the previous one as well. As to the epoxy covered blobs, Chip On Board (COB) is fine if done correctly, and is

Scott, You will need to use the 4.17.3 test release to run CMRI at speeds other than 9600. Dave Sand

Rich, I'm not near my layout computer so I can't check the other settings, but the COM port depends on what Windows has assigned. Open Device Manager, expand the ports section, and plug/unplug the

I'd stay far away.? Googling the UPC they have listed turns up an MRC decoder with a different form factor. Something's definitely fishy... Steve "Breezlys"

I am running JMRI on a Windows 10 machine talking to an NCE system (9600 baud), and CMRI (19,200 baud).? Although it's not clear to me that there is linkage, I recently upgraded to JMRI 4.16, I

How do I delete panel files from panel pro? I have JMRI v: 3.10 installed on an HP Pavilion running Linux Mint 17.2. Setup in simulation mode for NCE and C/RMI systems. A few years ago I started

The look like MRC decoders to me. Steve Lowens

Dave, Thanks for the videos. I tried the same turnouts you were toggling and the web panel works for me if I enable the proper sensors. Hopefully the upgrade will help, I don't recall you telling us

Don, you may have posted into a previously running thread.... but what you propose sounds like a reasonable approach to update an air-gapped Rpi.

Any decoder with a blob of black epoxy I stay away from. Learned that in my early days of DCC. It's cheap for a reason. John

Thanks, Steve. Looks like it's time to update!

Hello Group, I'm still having problems with my PR4. After a day of JMRI and the PR4 working correctly I'm now back to square one and not able to read read or write to any of my decoders. Someone

It was relisted.?233324627381 Rs

Here's one item number I found 123885233171 Not impressed. -- John Griffin *_______________________________* If today was your last day...

I just found this site.? I was working? on VSD last year and made great progress and am getting ready to go at it again this fall and winter.? I have some 20 files, diesel, electric and steam; all

Don, If my memory is correct, you say the command station was in storage for so time. It is the early command station - like the one I use - and I do an average of 2 installs per day. All program

Might help if you posted a link to the item on eBay. John

I've been seeing listing on eBay for sound decoders from XL Systems Inc. I've never heard of them. Are they supported by JMRI? ? Any comments on quality of electronics or sound?