开云体育

If you have the reporter in your script as rpt, you can emulate a reply from the network being passed to the reporter with: rpt.reply(message) Where message is a Z21Reply with the desired contents.

Phil, Would setting up the train as a kernel work better than setting it as a utility? Sam

Yes. If the decoder gets damaged with no LOSADA on it then thats how it got damaged as the dc loco on the track when i first tuned on the power had issues not to mention if the wheels were dirty or

The computer needs the Bounjour service installed for autodiscovery to work. the easiest way of installing that is to install itunes on the machine.

each decoder needs to be 'locked' using CV 15 and 16, using different lock values (thi will require only 1 decoder gettign power, at a time, to set up). afterthat, you unlock 1 decoder. program it,

What am I doing wrong? When I try to program with JMRI, I get an error saying the programmer is in use. I am using MRC Prodigy and an isolated programming track. I can program from my Prodigy throttle

Rich, I have occasionally come across this scenario with my PR4. ?To test it, I put a known working loco on the test track and used the Digitrax Sound Loader program to read the first 10 CVs and

Bob and Don, I assume we are talking about having a preconfigured RPi-JMRI EasyDCC Simulator option? JMRI now has an EasyDCC Simulator connection option (it was added sometime ove

I think he means he keeps a DC loco on the little (isolated) section of track that the decoder motor leads are connected to. Which would show as a load to the decoder if the track is clean and the

Jim, I understand that about EasyDCC only controlling trains and DCC accessories. I have a bunch of homebrew hardware connected to my railroad, controlled by software I wrote, running on an old PC

Just starting to use operations pro.? I have set up a staging yard at one end with 6 staging tracks and a destination with 2 spurs, which is actually the 2 tracks of a station. I want to set up 2

There’s no EasyDCC simulator because it’s not really needed. The protocol is simple enough that you can configure JMRI to talk out a serial port to an EasyDCC system, and JMRI will work whether or

Don: Your connection to CVP will only be able to run trains either with a display/keyboard/mouse or WiThrottle server... The later is the main point of Steve's RPi-JMRI... Wireless throttles... When

Try manually entering the server and port into the phone to see if that works. The advertising feature depends on which computer OS and sometimes what else was loaded on the computer. Many Windows

Thanks, Jim. Linux may prove to be a bit far in the weeds for me, too. I hope not! I've not used it, except for running some apps on a Linux computer. I'm hoping I'll not need to learn much about it

I am unable to get withrottle to work on my NCE window 7 system. The phone sees my network but jmri does not see the phone as a client. Thoughts anyone?

This is an issue with the Digitrax PR3 and not JMRI. Below is from the JMRI website http://jmri.org/help/en/html/hardware/loconet/PR3.shtml Using the PR3 programming track to program Non-Digitrax

Used Decoder Pro to change two Athearn GP38-2 locos from address "03" to their four digit road numbers.? However, on both locos the sound was removed but the locos operated with lights. Soundtraxx

On vacation, I'll take a look when I get back next week. Dan

Please read about aggressive mode.? The number of passes has no bearing on overloading. It is always possible to overload a track in aggressive mode, when the 1st train built does a pull and the 2nd