开云体育

Just to be clear, the consisting tool I am discussing is the JMRI consisting tool: described here: http://jmri.org/help/en/manual/DecoderPro3/dp3_Main_ConsistControl.shtml and here:

I know that the block contents tries to keep track of trains as they go around the layout.? I use Dispatcher and that puts the loco number in the block contents at the start.? Then as it moves

Hello, a little "up". no one has any idea to help me?

Sorry, my question was for Dan Boudreau or one of the programmers that has history with RailOp I don't have my railroad tied to the computer and I don't want it to be. My understanding is to have more

Ken, The key in either version is this: 2019-07-24 09:15:08,453 jmrix.AbstractMRTrafficController WARN - Timeout on reply to message: AA consecutive timeouts = 0 in nce.NceTrafficController

I run in several layouts. I set up my consists to run on all these layouts without change. SO, programming track for all consist setups. I set up specific function settings on each Lok in each

Hello Ken, Here are the JMRI 1.12 LOG and JMRI 4.16 Log. I am a computer novice computer novice. JMRI 1.12 Log 2019-07-24 09:14:55,777 util.Log4JUtil INFO - * JMRI log ** [main] 2019-07-24

Hi Torben. You cant actually call it a bug as it was done by design. If both the primary and alternate are both occupied then it wants the operator to choose which will be the next section, that is

Group: I was posting about the new Raspberry Pi 4 and heat issues... I've added a gallery and photo of a DIY 3D printed case and a commercial product. The case came from Thingiverse though I can't

@Dave : Thank's ! ! !

Hello, I may repeat myself but managing the servo directly in the DCC++ sketch is not a good idea. It seems simple but it is not the case, you will have to modify the DCC++ sketch. A simple solution

Ken, I monitored the commands being sent through jmri to the command station and found no error on the jmri side. However the light it's still missed on occasion seems like about after 4 or 5 turnout

I think improving how the throttle works with the roster and the consisting tool to select locomotives in a consist has merit. As a first step, I'd like to address how advanced consists are handled.?

Hi Dan, I am wondering if JMRI can be configured to work locos the way RailOp used to? Matt Greenwood

Ken S, I think this is a direction to try. 1. First thing is cut/paste the console log from starting up with your working 4.12 system. This gives us a baseline of your setup. 2. Make sure you

The JMRI roster screen is supposed to provide summary information you can use to identify the locomotive. I personally believe the value of CV19 is too volatile to use for this purpose. Here are two

I am using NCE with AIU's for sensors. I have been ?using CATS as a dispatcher panel but can't get it to keep track of the detected trains correctly. All of the blocks work correctly and all turnouts

Hello, I have been doing some experimenting. I now have active JMRI 4.12 on my computer. I tried installing JMRI 4.16 without erasing 4.12. That did not work. I unstalled everything and tried JMRI

I'd like to second this. I change the long number (to avoid conflicts with other club members) than I change the CV19 addresses. and it's really confusing when set cv19 in DecoderPro, then pull up a

Jerry, Use the text editor option for viewing the build report.? And for one of the cars that isn't being picked up, copy only the text for that car so we can see what is going on. 21 pages, wow! Dan