开云体育

Go to Preferences->Defaults and make sure everything is set to MRC and nothing to Internal. Also please make sure you are running JMRI V4.14 or V4.15.1 or the "Internal" problems may occur again in

I have a 'cu.usbserial-A9KJ71D9' and this is a selection in the 'serial port' option for a connection setup. Still nothing.

As Peter mentions, 4.14 is current and available at http://jmri.org/download/ If you’re seeing an earlier version at some URL, could you let me know where? I’d like to get that fixed. Bob -- Bob

Loaded the FTDI USB drivers and tried again. Found an instance of this error message for each time I tried to start DecoderPro. ?No error message were displayed on screen. ? 2019-01-05 19:54:31,524

The NCE DCC systems don't actually support Power OFF/ON commands: - With the Power Pro system we fudge it by using the ENTER PROG TRACK MODE and EXIT PROG TRACK MODE commands. This works with the

Congratulations Steve, glad to hear it. Maybe you can help my friend John Umberger, also posting in this thread, to get his PR4 to work. We have tried everything, we tjink. Maybe you can point out

Marc, I am using a DCS 200. John

Guys The update window that I use shows ALL production versions and ALL test versions. Shown down the left side of screen. http://jmri.org/install/WindowsNew.shtml Gerry -- Gerry Hopkins MMR #177

Hi Steve, Am I OK to copy / paste your advice for use on the JMRI MERG CBUS Hardware Support page? I'm presuming a CANUSB4? Thanks, Steve.

I just took a look and the PowerCab doesn't have the concept of track power being on/off. At least the notes I have don't identify any command for track power. If that is true, JMRI shouldn't even

Mike S, What website was saying 4.10.xxx as the current JMRI version? Jmri.org is the official site for JMRI. And right now, 4.14 is the official production version. We've already started on the next

While that may be true for the PR3 (I haven't checked, and I have no inclination to do so), it certainly isn't true for the PR4. Direct from the PR4 product page on the Digitrax Web site: <quote>

<http://www.ftdichip.com/Drivers/VCP.htm> Irrespective of DCC system, there are some basic rules for troubleshooting any USB-attached device to a Mac. Plug your device into your Mac. Go to "System

Yeah, I'm one of those who claims the PR4 works, because mine Just Does. And no, I don't use it in "connected mode" through a command station for programming. As a matter of fact, the programming

Don W, If you are building panels using Internal devices because you don't know which real system you will use, then assigning 'usernames' to each item will save you a lot of effort later. If all the

Can you provide the link(s) for this driver? Thanks, Dave S

Thanks Ken will check it out Sent from Mail for Windows 10 Sent: Saturday, January 5, 2019 4:20 PM To: [email protected] Subject: Re: [jmriusers] Blocks not working properly Alberto, Since you have

Computer info:- HP Pavilion dm1 Windows 7 Home Premium All updates installed Software info:- JMRI 4.15.1 Java Version 8 update 191 DCC info:- NCE Power Cab NCE USB Interface Problem:- I am unable to

Scott, ? ? ?In JMRI, select Edit, then Preferences then select Defaults.? Check and make sure all buttons are on Loconet and not Internal.? We had some issues with the? 4.12 version.? I'm

Hi Scott, I just got my PR4 back from Digitrax in Panama City after an EXTENDED stay due to Hurricane Michael. They advised that they tested my unit over a period of time and could find no issues.