开云体育

If you truly want to create a simple ABS signal system with PRR signals, the easiest would be to use signal mast logic.? You have already done the hard part of building the signal head in JMRI.?

This isn't a JMRI issue but an ID naming issue on your part. Gerry has already suggest one way to do it. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam

?????? I do a lot of installs for others so it is not unusual to get locos with the same number. My method of assigning the file name would be in your case:- NYC 4301 MRL 4301 I then have the owners

Running 4.15.1 loaded just fine.? Using SPROG IIv3 and noticed that the throttle speed control has changed.? It works OK, is just different.? Is this normal? ??? Also the lights changed on the

I have many locomotives with proper road numbers that overlap with others. For example, I have a Kato NYC PA unit with the number of 4301, but I also have a Kato SD70ACE in MRL with the same number.?

Hi Morgan, I'm new here too and had the same question (but only in my head). I discovered that one of my my new locos doesn't have it's decoder listed in the JMRI database yet so that right there is

Hello Mark (Deschane??), First, let me apologize for hijacking (or at very least, misdirecting) your thread. I felt like we may have had similar issues but it now seems I have confused your discussion

Hi Nick, It sounds like the way you might want to go is defining your own (signalmast) signalling system. I know that sounds daunting, but even I was able to do that quite quickly; I derived a system

Hi Bob, Re 1) Not only did I think that was the way to do it, I was also (and am still) just building my 'library of tricks' to use in the proper, big script later on. This is one of the stages of

Thanks Bob, It has been a long time since I worked on a signaling project. I was not aware of the ability to disable aspects. in masts. Since I have not worked with them , I wanted to sty with what I

Hi, Trying a similar thing with RPI 3 running JMRI 4.12, Java 191 but using the Loconet simulator for testing purposes.? The client is a Pi zero wireless with same pieces of software on the same

Unfortunately, I don’t think there’s much that can be done about that. It’s just the way Signal Heads work. You said you don’t want to use Signal Masts, but they do provide that ability to

1) Why make the main thread wait with a join? What does that do for you? 2) I’m not a Bash expert, but that looks like it should work. Somehow, Jython isn’t initializing properly for you. Are you

Hi Morgan, There are definitely advantages to staying up to date as far as JMRI is concerned. For one thing, if at one time, say in four years, you find you HAVE to upgade (for whatever reason; could

Don't worry too much about the small test updates . I just update when an official Production release comes up . We are now on production release 4.14 . There is a test release of 4.15.1 now , but I

Since I don't have anything up and running yet. Let me start: I have a Zephyr/50 and some BLI locos. I have downloaded JAVA and JMRI. And have played a bit with JMRI. But. I keep reading about all

Sir,? If we can create an "MQTT (traffic) monitor" to show the "incoming" and "outgoing" Topic and Message, we should have a good starting point.? I'd be willing to write some code to allow us to

I too did the same thing. Once I looked at the xml, I saw the format being wrong. Remembering we ran into this a number of times before, the fix is easy for us who edit xml files. What I don't recall

Hi Bob , Thanks for the quick reaction. Re 1: I actually do that in a separate thread - but then the first thread waits while 'join'ing the subthread, so that remains the same problem, really. Do I

Scott, The Route system names were too short which caused Java errors. They were long enough to pass XML validation. I added an I (Internal) to each system name.