开云体育

My version is 4.11.4+R4534304. I checked defaults, and yes it had changed to internal.? I reset to NCE as you suggested.? Now working perfectly.? THANKS to Peter and Tom.? I will get the upcoming

Hey Timothy, It may indeed be something else, something like you hypothesized... but, it might be the nature of the waveform on either side of the zero crossing. ?For example, if the signal is

I'd say start by confirming the node configuration is showing the right type and bits of the I/O cards on the SUSIC. Next confirm you have the right turnout names for those cards. So the turnouts

-receiving inputs from sensors- blocks indicate occupied correctly on layout panel -can't get turnouts to operate - turnout simulation works on panel - cmri hardware is one Susic node with one output

Sorry Peter, I had actually thought I had posted it on the NCE Board. But will do. Thank Dave Sent from my iPhone 6 Plus

Hello all,? I have had much success with the virtual sound decoder except in one area.? I have created my own decoder config and sound files and am having issues with the Looped throttle notch

Go to your preferences and check your defaults tab, most likely have changed to internal. Change back to NCE. The update JMRI to 4.14 when it is released, hopefully in the next day or two. -- Peter

Norman, What version of Jmri? Your symptom points to Preferences - Defaults being set to Internal. Jmri 4.10 had a problem automatically doing this and not telling you. It continued into 4.12. I

Not JMRI related and should be moved to a more appropriate forum. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator -

I need help with accessing the programming track, which previously worked perfectly, but no longer.? For some reason the program will no longer correctly read values for the CVs when the loco is on

How about a photo in the files section, let us know how to get to it. John

John: Only two cap symbols I'm familiar with are the non polarized -||- and polarized -)|-... There are other parts with odd symbols but look like ground or earth don't think so what board and for

Not JMRI related. You should take this discussion to the NCE forum. /g/NCE-DCC -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley

Does it look like two capitol "T" with the top cross pieces facing each other, something like this -I I- ? If so, that is a non-polarized capacitor. If the symbol is -) I-, the curved side represents

Have this board, for the layout, that has a symbol I am not used to for the caps.? Looks like a ground sign.? Can I assume this is (-)? -- Jon Miller For me time stopped in 1941 Digitrax

Well Dan, there is only one train, with 3 locomotives advanced consisted, with 21 cars, all flat running. It’s rounds around the layout 2 or 3 times, then this happens. The train is cleaned. Yes

Richard, I do what Ken suggested. I use the lights to display an icon on my CPE based on turnout position but I have no connection to LED's on my layout. I follow the same process you do except that I

I would look for a short on your layout.? Does the circuit breaker trip when the locos are crossing a switch?? Do your locos have sound?? If so, there's a current surge when charging the sound

The boosters should read PB105 Thanks Sent from my iPhone 6 Plus

i have read the NCE EB1 manual and it says that the factory setting is 2.5 amps. When I am running a train, 3 locomotives in advance consist, it had a tendency to kick the breaking out. It did it in