开云体育

I don’t think there’s a preference for timezone when saving that time. Generally, JMRI saves UTC time (Z indicator) for things so that it doesn’t have lots of code for zone changes, etc.

Dave, Thank you again for your help with this. I want to mention to you that I have been using the same cables connected to the NCE Power pro command station for years but with an older Mac and older

Managed to resolve it now. I could not remove the "odd" turnouts, then add them back,? because I could not access the remove option in the menu. But using the Delete key on the keyboard, and adding

Hi All, I have a panel that appears to be corrupted. Two of the turnouts behave as below: ?- I can left mouse click and the turnout operates on the layout ?- I can held right mouse and drag the

Perry, Thanks for the log. This indicates JMRI has found the Prolific cable and is using the correct Baud Rate and command station settings. There are two settings you need to check in the Power Pro

As a test and not ready for primetime…. You push a msg to topic trains/sensors/ESP/MACADDRESS That only contains an int….this will adjust the polling interval in real time…so this is a POC of

Hi, I have just got back into my model RR after a long abscence due to work on the other side of the country.? My layout was mothballed, and so I did not keep any of my software up to date on my

My WIP code See comments for my thinking on how to iterate into features, but the idea for me is that I am going to make a second q that allows these things to “self config” Then maybe on that q I

Dave, This log is after I did what you asked in your last message: Perry 2018-12-16 09:38:14,801 util.Log4JUtil INFO - * JMRI log ** [main] 2018-12-16 09:38:16,560 util.Log4JUtil INFO - This

I changed one step in my power on process this morning - I unplugged the USB cable before powering on the computer, and only plugged it in after I had logged in but before I started PanelPro.? That

Dave, here is the USB cable report: USB-Serial Controller: Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc.

I recall seeing a reference to jmri software being able to log individual loco running hours but I've been unable to locate such a feature. Can somebody confirm its existence please?

Marc, Posting those screenshots in an album under Photos would be very helpful for Mel to check his settings. I don't have LocoNet so can't do some. -- Dave in Australia

Marc, Your images were stripped. You'll have to upload them to the Photos area. -- Dave in Australia

Ok, Larry just posted that he used MX649 +32 I do not have that id in my definitions . How do I obtain it. Mel

Marc,? Locobuffer-usb Mel

What symptoms do you get? It will help us hugely if you go to the Help->System Console menu item, click Copy to Clipboard and paste that into message for us all to see. Alternatively, go to the

Until you fix the CVs returning 123 problem you don't have the faintest chance of success doing anything with any decoders in JMRI!!! No exceptions! It will help us if you go to the Help->System

Dave, I thought about the programming track connections when it did not respond. Reset the sound on a couple s-4 's that needed a bit more volume, and all worked perfect. I have double checked and

At a recent operating session at my home we were running several locos that had been programmed on my desktop programming track using a Windows 10 Home desktop and a Sprog3 as the interface between