开云体育

This is how SPROG in programming mode works. When you are programming (Read or Write) track power is OFF and you are using the programming track power levels. The whole layout/track you are linked

Dennis, I agree with the maybe, depends a lot on HOW you're planning to automate. I use JMRI Dispatcher for my layout, and I've had 5 trains scheduled, with 3 active at once, with no issues running on

Dennis: I would say maybe... It all depends on just how many options the software has to deal with. Since you're posting here timing will be an issue, Java is interpreted which slows operation. The Pi

John, Using CPE and SML is fine. Doing so DOES change how the SML is created. “Automatic" generation of SML is based on the block topology defined by the Layout Editor track plan. "Manual" creation

I am a little confused by this option on the Schedules page. 1) Does it only apply to the current spur, current schedule, or universally? 2) If it applies to the current, does it apply to all of the

Thanks Steve & Ken. Thats my first visit to Routes. Works a treat? !

Scott....all that makes sense and helps me a lot. I understand how the second train works as long as it is moving in the same direction following the first train. How about if the two trains are

There is a script called SetAllUnknownSensorsToInactive that is part of JMRI.? I use it for my testing.? You can have it run at start up by defining it in the Start Up section of the Preferences.

Does the RPi 3 or 3+ have enough horse power to run a large HO layout with automated trains? Say there are two large independent loops with staging yards, one with 2-4 trains and the other with 4-6

You have a few options. For Internal sensors, there is an option to set them to initialize to INACTIVE. But for 'real' sensors, the issue is getting the status from the layout. Here it depends on the

Hi All, No Sprog hardware but in an earlier message Rockpro says "Thinking all this might be endemic to some of the other warnings and things". What warnings are these? Is there any weird activity in

Hi Paul, create a new route, PanelPro > Tools > Tables > Routes > Add Select any turnouts / sensors you'd like setting and their states and save the route. then go to? PanelPro > Edit > Preferences >

Same here.?? Pi-Sprog (just got it the other day).??? Using Steve Todd's image on a Raspberry 3 B+.?? Everything works great except track power goes off automatically goes off randomly for no

At start up sensors are set to condition "Unknown". Is it possible to set them to "Inactive" at start up?

Hi Jon,? Thanks very much.? I've no idea how I missed that.?? Chris

Dick Thanks you for the EXCELLENT reply dated Dec 2nd it has opened my eyes to the differences in the different JMRI design systems. I agree with Alan B Pearce’s comments “ it should be in FAQ”

Hi Paul, Fundamentally JMRI is setup to move a railcar once per session.??A person would?Build all the Trains at once then print out the Manifests and Switchlists for the Trains and Locations (the

Hi Paul, Sorry for talking so long to reply.? Sometimes work gets in the way of trains? :) Looks like you took care of #1. For #2 - yes, if you want the?next train to pick up the cars the previous

Dave Thanks - that fixed the problem. Regards Roger

For what it might be worth, a trick that I have used is to insert a print command into a questionable Logix item. One example snippet, copied from the "Browse" feature of the Logix Table window, looks