开云体育

I have noticed that after a fresh start.. with or without reboot of Pi.. I have to switch track power off/on at least once before any throttle data is actually at the rails.. even though power is on

that's kinda what I gathered from reading the manual. So an operator builds a train from the switch list, hands it over to the nest operator that takes it to the next city and drops the train off on

Martin, Most would agree that you and your operators should decide which arrival and departure tracks to use rather than the program.? Here's the link to the help:

The error message below indicates that there’s a problem accessing a library that JMRI needs. It’s usually part of the JMRI distribution, and lives in the “lib” directory within JMRI. Not sure

The error message below says that the "Roberts Layout31.xml” file in the "D:Layouts JMRI” directory could not be read because the name “LT11 DS TR” was defined for two different things. One is

Ken, Will not work in PE mode. I can add a regular turnout in PE with no problem and I can get the double cross icon window to show up but the "Add to Panel" button is grayed out and will not do

I am unable to launch this latest version of JMRI Decoder Pro. I downloaded the latest version and it seems to install OK. I have also installed the latest version of Java. I am running Windows 10 on

Hi JMRI friends, Does anyone know why the throttles freeze for a short period and then come back.? I am using JMRI 4.10 on a new dedicated motherboard and SSD with 8 Gb of memory.? JMRI links to an

Hi Dave & Cliff Tried to understand Dave's scripts... but I'm not a programmer so scripts are not of much use. First off.. Connection Prefix is "L" for Digitrax on both computers. I have modified both

This is my first go at JMRI. I have loaded all my cars, locations, made 2 train and 2 routes. The build works just fine. I have departure and arrival tracks at 3 of my main terminals. I am wondering

Perfect Dave.? Thanks so much.

hi there is there a decoder pro definition file for massoth decoders thanks? keith

Paul, You can flip between PE and CPE. So flip to PE mode and add your double crossover. Then flip back to CPE. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org

This needs to be in an FAQ somewhere. Thanks to Dick for a clear definition of the differences. Sent: 02 December 2018 23:47 To: [email protected] Subject: Re: [jmriusers] Panel Pro - Layout Editor

Hi Paul, Like the others have said the way you propose will work. I would like to offer a second way to experiment with which will save you?some time, be simpler,?and?will better suit your future

Based on recent discussion items in this forum, I’ve added some more “how to’” and “what-where’s” as well as continued with reorganizing the scripting web and help pages. ?These

Check the preferences/defaults in JMRI and make sure it shows connection to LocoNet not Internal. I had the same issue that I got figured out today.

Jack, Try this file: /g/jmriusers/files/ProblemsBeingWorkedOn/dsand/Full%20Yard%20DSx.xml Dave Sand

I have a working panel in Layout Editor for my layout and now I want to build one in CPE but CPE does not have the double crossover track segment icons I need to do my layout. I know that PE has a

I am try to install a LocoBuffer-USB connection on my new laptop (Windows 10). The driver install goes OK but I end up with no connection to the Loconet. Both green led's on the LocoBuffer (version