开云体育

Unsucessful test on the other area that has the same situation. Signals stay green regardless of allocationm so the fail safe isnt working in this file. I have uploaded my current panel config. I have

good info all around. Dave, it is astonishing so many WiFi throttles at once can use the NCE connection.? ?Just 3 throttles will have me jumping around like juggling oranges and bowling balls.? The

Michael, Since you defined a signal mast, you also need to create signal mast logic. Which signal system did you choose when you created the mast? Sample with 4 masts with traffic moving left to

Actually the two servos should be linked together. What circumstance would you ever need for only 2 turnouts to be thrown.? It's a little hard to sometimes get our heads wrapped around this, but all 4

So I downloaded 4.13. I was able to add the NCE light it as a signal mast and can change its colors from the signal mast table now. Now how do I get on my panel to where it will detect the occupied

I use a Contour ShuttlePro (https://www.contourdesign.com/product/shuttlepro-v2/) on my Windows machine, for video editing, and wondered if anyone has got one to work on any Linux installs to control

If you simultaneously switch a 2-rail double crossover from both routes straight to both routes diverging, the polarity of the end frogs of the diamond are indeterminate. However it may be possible

Andy -? Not sure I understand your question as frogs have not yet been connected other than what came from the manufacturer (Walthers) and this has not been a problem in my testing so far. ?If they

Are you mechanically operating the diametrically opposite turnouts for the permitted route in order select the frog power to the switched diamond frogs in that direction? Andy

Tim, Put the clock on a JMRI panel and then display it to a tablet or phone using the JMRI web server. Bob Bucklew

Using JMRI 4.13.4+R49e7a86, Java version 1.8.0_191 on Windows 7 PC. I have a double crossover track (four sets of points) that is controlled by two switch machines: the upper left and lower right are

Using SSL, is it possible to create a panel that can detect the direction of travel? I haven't been able to figure it out if you can do so and would appreciate any guidance. Thanks in advance. Clay

Jim, Tom, There are two different "stop" instructions in the DCC specification. The normal "go to speed zero" which slows something following the momentum curve in the decoder, and the "emergency

Tom: Assume that all is via JMRI on your computer screen to either the USB connected DCC++ or Lenz system? Not direct help with Lenz... but, emergency stops can bypass momentum. True for the NCE I

Taking Fraser's suggestion - I've put my screen grabs in Photos - (It wouldn't let me put images in 'Files'), under? SML Table Max Speed Issue - Torben /g/jmriusers/album?id=78917 Is

Hi Torben Put your screen grabs into a folder you can create in the "Problems being worked on" section of the Files section then you can point to them in any posts you make. Fraser

Sorry Steve - perhaps I didn't make myself clear. I reset all the Warrants from 100 to sensible values on switch on again!? ie I have to do it twice.? -? If I just let the SML calculate the max

Hi Torben You can find the definitions in the files section of Groups.io in "BR2003 Appearance file for Matrix signal mast". It's all in there. If you need anymore info email me direct either through

Dave, Will download 4.13 tomorrow. I did download tonight the 4.12 and it messed some stuff up. Like on my panel, as the train moved the blocks didn’t show it unless I clicked somewhere on the

I wouldn't be trying anything less than the latest test version. I've added a lot of support for Light-It over the past few production releases. But the latest V4.13.x test release is certainly more