开云体育

To update your system you need a network connection, use your VNC connect to get to to the Pi.On the task bar (at the top) you should see the icon for the terminal window. Open the terminal and type

Using?Engine Driver connected through JMRI, when I attempt to acquire an engine that is "In Use" on a Digitrax throttle I see a "steal" message on my phone with Y or N options.? Regardless of which

I originally set up my Raspberry Pi using the information from this gentlemen's site. https://mstevetodd.com/jmri-raspberrypi-access-point I am looking for some assistance in doing the following to

Roger, ? ? I too have a second Asus laptop with JMRI running.? Did some tests and see running two laptops feasible, but the second one I disable the startup scripts.? I think also there might be a

I have the DecodePro on this desk top computer. I also have a ASUS "laptop" computer which I would like to connect to the same soft ware so I could connect with the home railroad.? I model in n-scale

Thanks again David, all has been fine over the weekend Jim,

This can also be caused by your antivirus software preventing you from writing the LaunchJMRI.exe file because it is a new version and that antivirus software doesn't yet trust it. If you know how to

I had not closed out of JMRI so will try again tomorrow. Thanks for the help. Jim

Jim S, Did you have JMRI running at the time? You would need to exit JMRI to do the update. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com

Hi Mitchell I did nearly the same thing. I started by using a grade crossing in the centre of the double crossover for block 40 you had made it with two lines crossing so half of block 40 was

I updated my version of JMRI today and received the following error message: ?Error opening file for writing. ?C:\Program Files (X86)\JMRI\LaunchJMRI.exe. would appany and all help or suggestions.?

Dave Sand, Sorry for not responding sooner.? I believe I might have been experimenting a while back and most likely caused the problem you just provided a remedy for. Thanks for your help!

Dave S, Was there any reason for they different types of turnouts to name/rotate differently? I suspect it was simply the case of who wrote what and that it got into common use before anyone noticed

Dave thanks for that explanation. Is there a reason why all of the formations are not coded in the same direction? Be it clockwise or counter clockwise. When I was entering the turnouts it occurred to

Dan, Thanks. I can live with it now that I know what is going on. However, fixing it in the next release will help users who have not stumbled on this yet. Paull D

Paul, Did some testing and figured out what the issue is.? If you don't select a car type when adding a car, the load combo box doesn't get updated.? So if you're using the very first car type, you

Dave, For slips, the blue connection is A and proceeds “counter" clockwise. The connections are A-D, A-C, B-D and B-C (double only). For cross-overs and the level crossing, the four connection

Paul, If you press the "Add" before you edit a car load the load menu will update for you.? However, if you select a car type, and then immediately create a new load, the load is created, but the

Dan, The system console does not show any problems even though the new name I tried to add would not stick. I played around with it some more and I think the issues may be in the sequence of events.

Thankyou Richard Regards Stewart -----original message----- Sent: 12 November 2018 14:09 To: [email protected] Subject: Re: [jmriusers] JMRI Rasberry Hello Stuart, The easiest way to get JMRI up and