开云体育

Thanks Dave. Meant to say above that if I open the panel on my windows laptop the actual turnout context menus open just fine.?Here's a picture (

Hi , uploaded. Have not seen it arive yet though

Jb, All of those “turnout circles” are track segment control circles. AnyRail represents curved track as MANY small track segments. I believe there is an AnyRail option to use a flex track feature

Scott, It is quite possible that the sensor and Logix windows are very tiny. Look at the Windows list in the main PanelPro menu. You may need to expand them. Dave Sand

Hi, I exported my layout from AnyRail and opened it as a panel. After enabling editing mode it seems like there's a lot of stuff that maybe isn't needed coming with the import? For instance there's a

Jim, Can you also upload the script? If so, then we can verify that it is the source of the sensor changes and possibly how to avoid the problem. Dave Sand

Hello, I’m just getting into this myself. I have a Power Pro with version 2007c software. I have 2 AIU’s wired up to 17 BD-20’s, and a switch-it 8 for turnouts. I’m able to add turnouts and

Hope I am not hijacking the thread. Dave do all these settings for the PowerCab and AIU,s hold good for an SB5 i.e. USB jumpers and cab IDs. Thanks for any help. Derek.

Hi, yes there is a main script running that waits on TCP/IP connections from a remote raspberry Pi that is controlling the physical devices. When I save the panel there are no active communication?

James, Each of your internal sensors has the property attached. It appears to be a reference to a Python based listener. Are you running any scripts while JMRI is running? Any other software that

Very funny Dave, laugh out loud. Thanks very, very much for all your help. Tonight I will connect some new BD,s to the new AIU and I don’t expect to have any problems. I am learning a lot. Cheers.

BTW I use feedback on my module and so far one other module in our group has it. It is really cool to watch the signals dropping back to red as a train passes. The feedback is on the mainline turnouts

sorry - worked it out I have put it there.

Several ways I can think of to cut down on interference. 1. Can the decoder and motor supplies be separated? If not use the decoder to switch a relay that then uses a different supply to operate the

After extensive work (and frequent saves), all the sensors and logix have disappeared no that I have quit JMRI and restarted it. I can see (by looking at the raw XML) that those elements are still

Thanks - how do I do that?

Jim, Upload the corrupted file to the ProblemsBeingWorkedOn area. This will simplify the analysis since we will have the full context. Dave Sand

Hi, I have hit a problem that when I save a panel it comes up as corrupted when I try to reload it. Looking at the panel after I save it, the lines it objects to are with the <properties> tag

Iain, The Logix actions all occur one after another with no delays. When delay is specified, the action is assigned a timer which will eventually execute the action. You need to stagger the delays: T1

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* Pennsy_West_Yard.xml *Uploaded By:* Scott Walton