开云体育

Michael, I will try to get that value and check to see if there are bulbs or leds. Reads as a TSU2. But had problems reading and writing with the 12 volt power supply. Need to correct that first. On

Hi Peter While running have the log display open PanelPro->Debug->Display Message Log and see if you get any messages. This problem is normally caused by block connectivity issues, turnout

Thank you. That fixed it.? Steve?

I agree that you’re welcome to work that way. Many people do. How can I help you start? But I _also_ want to encourage people (who want to) to get started with some code, as that gets something

Its possible you have an old definition file. Pick Help - Locations... Push the "Open user Files Location" button Look in the decoders folder Delete any old files for the ECO (and any other decoders

Robin, That is a clear sign you need to go to Edit->Preferences->Defaults, and change the selections to LocoNet from Internal. Then save and restart. That should take care of it. Some versions tend

Robin, 2 things: Make sure all of your preferences are NOT set to Internal. What version of JMRI are you using. You should be at 4.12 at least HTH John Griffin -- John

That means that there’s a system name of “1” somewhere in your file. Perhaps it’s near line 20933, but the line counts are not always accurate. System names should start with a prefix for

When I call up a known decoder and attempt to read the setting values on any sheet, the value 123 is returned in all cases, with the loco address as 15227! If I create a new loco, and then read the

Having resolved signalling problems, I have now set up Transits and tried to operate a train automatically. Both in simulation and real situations, when the train (just a loco at this stage) arrives

It would be useful to know which version of JMRI you are running now, I suspect you just updated, so also the version you were running. The more recent versions have tighter checking of the panel

Hi Everyone I'm getting a parse error when I?try loading panel pro?here is the exception:org.jdom2.input.JDOMParseException: error on line 20933: cvc-minlenght-valid: value '1' with lenght = '1' is

I've been corresponding with Nancy at Soundtraxx, it looks like the F45 does not have it's own set of default values, reused same decoder as the SDP45.? I did not have any info for the SDP45 either,

Oops yes, you were correct about the build. In any case, package build 2659 and later have the required updates to make this work. There was a subtle bug that took me a while to find. Paul

There are, of course, lots of different possible approaches to achieving timetabled operation: some of them more flexible (and requiring more coding work to set them up) and some of them more limited

Michael, I do not have the loco here. I forwarded your email to the owner. We will try to get you that value. Did you see that the quill choice appears (WOW V4) when reading a new locomotive but when

Is it possible when I downloaded this version I didn't get all of the program?? Steve

I'm using the first one on the list econami diesel ECO-21 pin.? This was selected by JMRI when it read the decoder.? I noticed the UK version looks fine.? ?Steve

Which Econami definition are you using. I took a look at "ECO-21P Diesel" and it looked fine. -- Dave in Australia The New England Convention

There's only one Roster File for each decoder and programming changes should be saved to that. -- Dave in Australia The New England Convention