开云体育

Jay, Everything you say below is working as designed. When you set the preferences to internal, whether you save them or not, that is telling JMRI to only communicate with itself. There is no

Thanks!!!!!!!

Hi Steve, In the JMRI Pref's the jmri-managers.defaults are set to Loconet. It is set to Loconet, PR3 Standalone, Com15. If I change the prefs to Loconet to internal & save & restart, they reset to

Hi ? Duplicate the roster entry for the lead and then edit the name & dcc address and save, just dont write it to the loco. Steve G.

The community is very helpful in providing example Jython scripts to do a variety of useful functions. Of course, all scripts need to be modified for local circumstances and that is where I start to

Jay didnt say he used the SAVE button in preferences.? Maybe this is his problem. Roger

You’ve probably already done this, but I had a similar issue yesterday setting up my PR3. Check to make sure that the PR4 is on the right COM port on the PC. Go into Device Manager, Ports on the PC

Is there a way add the consists numbers to the roster file to call up the throttle?

Thanks Bob, unfortunately I'm too poorly at the moment to try the fix. Will have a go asap. Bob M

Thanks Dave I knew there had to be something else but I think it would have taken a long time, if ever, before I twigged that one. Cheers Fraser

Jay, I'm puzzled by your JMRI version number. It doesn't match anything I have seen. Dick :)

Sorry, hit Reply too soon. Jay, It's possible that your Preferences are being saved, but then changed again on startup. Same result to you, but it would be helpful to know which is happening, to help

Hi Jay,? It's possible that your Preferences are being saved, but then changed agi

Phil You'll have to dig in the online help, but I believe there's also a method to import an existing inventory from a spreadsheet, if that helps. Blair

You have to go to Actions->Recreate Decoder Index so the change in Version IDs is propagated to the Decoder Index file. Dave in Australia

Phil,I'm by no means an expert in JMRI,And I'm sure others will chide in.The locomotive roster in decoder pro can inventory your motive power.?And if you open panel pro>operations >cars, you can

Hi I have just installed a recently purchased Hattons decoder into a loco. They still call it MD4 but it is quite different to the previous ones I have used as the green wire, as well as the usual

What's the error log say? Where are you trying to write to?

I was trying to program some engines tonight. It didn't work. My setup is Win 10 Pro box hooked to a PR4, JMRI 13.4, & Java 8 I looked under prefs, defaults. They were all on internal. I changed them

Got it.? Went to that signal head and as you said, it's SSL logic wasn't defined.? turns out it was not being used.? Deleted it and all is well. Thanks!