开云体育

Begin forwarded message:

I'm running 2 Intermountain HO ET44AC locos on a NCE power cab system.? The locos are nicely speed matched and run nicely lashed up, but as soon as I hook these 2 locos up to some cars (23) I have no

James, JMRI Warrants also allow you to simply click on the entry and then exit blocks. If there is more than one possible route then it will prompt you for your desired choice at each alternate point.

Hi Dave, As requested, here is an example of how I close the serial port. Also note that the "return 0" also terminates the script: *if closing_test == 1 :* *??? ??? ?print "Script Ends"*

James, NX is a standard JMRI feature: http://jmri.org/help/en/html/tools/EntryExit.shtml <http://jmri.org/help/en/html/tools/EntryExit.shtml> The dispatcher (human) selects an entry sensor and an exit

Dave Lowe, Thanks for the interest. I looked at your link - just one picture, but a neat implimentation. I'm not using servos, so I've been working with the SMA-17. Mine are also homebrew on perf

Hi, The dispatcher tells Extra CR2340 is clear from Echo 3 to Jackson 1 via radio. In JMRI the train name is put into the Tools>Blocks>Value for Echo3 (iconified window).? Echo 3 would show occupied

Gabor, On the main menu will be an entry for each connection. The first sub-menu item is normally used to open a monitor dialog. The monitor displays all of the messages passing between JMRI and the

Thanks Steve, I can update the config now I know - I thought that was probably the case. I use a bluetooth keyboard.

Hi Andrew, the steps I took to enable the serial interface for the PiSPROG do disable the bluetooth. You can undo them (referring to the prior post), or I can post the link to the 8/13 image, which

Andrew, I can only speculate since I don’t have this hardware arrangement available to me. Here are the steps that I would use after adding "Open JMRI System console" to "Preferences >> Start Up"

Paul, I tested build 2642. Is better than the previous, but there is still a problem in the single CV programmer: if I write a CV value greater than 128, after the POM CV write, textbox value decrease

Could someone add the mentioned loco to the list of choices of locos highlighted when reading the decoder. May have been inadvertently left off ??? just would make helping someone over the phone a

Hi Steve I installed the image and have it up and running but I have no bluetooth - adapter not found. It is Pi3 B with built in bluetooth. Does the pi3-miniuart-bt overlay affect this? Is it intended

Jay, that is most interesting. I have had a look over the general instructions, which give me an idea of what you have achieved but not so much how you have achieved it, and it would be most useful to

Your offer of further help has come at the psychologically right moment when I was feeling discouraged after an attempt, at Ken's suggestion, of applying ReporterFormatter.py in BackAndForth.py.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* JMRI TCS Non-WOW Decoder Improvements.zip

The turnout error can change the referenced turnout but is something like this (my DCC++ turnouts are DT67 through DT98 and I have seen messages on DT67, DT68, DT71 randomly): "Unexpected error

The sensor error I sometimes get is: "Could not create sensor System name "ISCLOCKRUNNING" in adaptor of type jmri.jmrix.internal.configurexml/ErrorHandler.shtml"

All, I am running Raspberry Pi with Raspbian Stretch 9 Java 1.8.0_65 Panel Pro 4.12+Rb6a9bb1 DCC++ though Arduino Mega 2650 with Pololu motor shield I have setup my command stations properly and with