开云体育

Dave, I've followed your procedure in the past, and it produces consistent results avoiding the problem I identified above. ?However for various reasons I decided to start describing the layout

Jim, ? ? Turn off analog on the loco. Roger

Jon, ? ? Some cars are all black underneath so they dont get detected.? Are you wanting them to look up under the track?? I use some of those IR detectors in pairs facing each other so when

How about gluing some small bits of aluminum foil somewhere discrete? John

This may be a _little_ off topic for this group but I need some engineering help.? I'm using some TCRT5000 Infrared detectors (eBay).? When testing a light brown colored underframe the detector will

I placed an engine on the program track, connected to JRMI and the engine took off on its own.? I am using the SPROG for this purpose.? What is causing this to occur and how can it be fixed?

I have successfully created a few Signal Heads? (and then Signal Masts) to test my understanding of the process.? I then went to edit the raw xml file to create all 64 possible "turnouts" to use as

Gary, You should update from 4.10 to at least 4.12. I personally always go to the latest test release which is now 4.13.2. 4.10 has some issues where it randomly changes your default connection

No Thats a pr3 connected to a? command station in regular mode.??https://github.com/JMRI/JMRI/pull/5638 Steve G.

Ok, but that is PR3 As a command station right? ( I.e. the mode that allows using the PR3’s programming track outputs ). It should be anyway. Paul

Command station consisting It is not enabled for PR3, it is enabled for "loconet over tcp" and LocoBuffer and appears to be enabled LocoBuffer II. Steve G.

Dave, Tom, and Thomas, Thank you for your help. I used autodetect but did not read all the CV’s. I will do that when the owner brings his loco back (probably on the 20th). Programming on Program

Paul, For me, the easiest method is to never create a Block. When I am creating a Layout Editor panel, I assign a block “user" name to the track component using the Edit context menu. If it is a new

If I open the block table and select the 'Add' button I can then add 1 or more blocks. ?If I specify a block system name ?(e.g. IB1 ) and check 'Add a sequential range' I get blocks generated with

Please double check your defaults. On my Linux machine, I have noticed the default for Consist sometimes hides off the edge of the screen. Make sure it is set for your LocoNet connection. Paul

Steve G, Sent from my iPad I just checked with my DB150, using the head of master from about 12 hours ago, and it is enabled there. It’s been that way since I created the LocoNet Consist Manager (

Thanks. I thought I saw it enabled a couple of versions ago although I was probly mistaken.? ?I just figured I did something to disable it.

You'll never find it if you spell it "Athern". ~} My spell checker even highlights it in this reply! Andy Jackson Santa Fe Springs ; Andy Jackson Santa Fe Springs CA

Paul, I noticed it a long time ago (yrs?) and then forgot about it,I can fix it this aft (my time), if someone doesn't get there first. Steve G.

Mark, what labels do you have set for buttons F1 and F2 ? e.g? "Bell" and "Whistle" or "Horn", or something different? Peter