开云体育

Thanks. I thought I saw it enabled a couple of versions ago although I was probly mistaken.? ?I just figured I did something to disable it.

You'll never find it if you spell it "Athern". ~} My spell checker even highlights it in this reply! Andy Jackson Santa Fe Springs ; Andy Jackson Santa Fe Springs CA

Paul, I noticed it a long time ago (yrs?) and then forgot about it,I can fix it this aft (my time), if someone doesn't get there first. Steve G.

Mark, what labels do you have set for buttons F1 and F2 ? e.g? "Bell" and "Whistle" or "Horn", or something different? Peter

The LocoNet Consist Manager, which creates consists ( both “Universal” and Advanced ) in the LocoNet specific manner prescribed by Digitrax, is supposed to be enabled on all Digitrax command

Hi Bob, Thanks much! That was simple and worked perfectly (and I should have thought of it myself!). Much appreciated. Have fun!? :-) Best regards, Geoff Bunza

I think it’s been mentioned, but check out http://jmri.org/jython/serialinput/README.md Those scripts are a very efficient way to get analog values (i.e. numbers) and digital bits into JMRI from an

You have to leave a reference to the SerialPort object (I.e. the thing that was returned when you called “open(..)” ) somewhere you can get it. Once you have that, you can call “close” on it

JMRI’s “Turnout” concept is about _accessory_ decoders. They’re operated completely differently from how locomotive-style decoders are operated. But you can write scripts to do this relatively

Hi Steve. You are not missing anything, it's not enabled. Steve G. -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

So, it's been a couple of weeks, and I think I've made progress. Actually, I'm very near ready to install this thing, but I've got one question. *Will JMRI re-transmit a DCC Accessory Decoder if it

Soundtraxx has cheat sheets for Athearn engines that have tsunamis in them. I would take a look on Soundtraxx's site if I were you. John

Hi, Question: I have a functioning script cal it scriptA working well using a serial port successfully as the input and output stream. If I kill the script, the port is left open. Is there a way to

Thanks, but I changed the decoder selected in jmri and now it will power up when I hit mute, was not doing that before, so it seems that is good enough It is a tsunami2 I think all Athern genesis are

David, Sure. A slip always has 2 turnouts assigned and setting them appropriately will create a path. To help visualize what happens, do the following: Create two internal turnouts, TA and TB. Use New

Is it possible to create a route through a slip, without breaking it into separate turnouts?

I have a raft of Atlas RS-3. All are Loksound Select. What hardware are you using? Thomas DeSoto, TX

I’m currently connecting the Arduinos as C/MRI SMINI nodes which doesn’t suit my new purposes at all, allowing only sensor and turnout input (that is, zero or one) to JMRI. ?I need an interface

Robert, I came in, in the middle of this conversation so forgive me. I am assuming that the decoder you are talking about is a Tsunami2. Starting the engine at power up or by function is controlled by

Steve - thanks for the response. So what I am observing is an ED behavior. Hopefully Robin will see this thread and respond. Mark