开云体育

Thank you all for your continued assistance. Following a suggestion made by a member of the Model Railway Club this evening, who has some experience with JMRI, I have tried some further tests with

I think I figued it out but I don't have a tecnical answer. Long story short, I was openining and closing wi-throttle and web server so the consists were not being fully dispached after use. I was

Dear Dave and JMRI Users Group, OK gang it's "show and tell time." Following the Digitrax instructions-*SEE IMAGE 1 BELOW*- I've substituted DCS240 for PR3 as the DCS240 has the same USB connection

Because of the sparse documentation about most of the advanced features of the suite of software that we call JMRI, I'm not sure if what I'd like to implement is even possible. Here goes what I'd

I am using one-drive successfully.

Ignore the conflicting posts. Follow the instructions below and it will lead you through the checking whether you need to install drivers on the Mac: USB Devices Mac ============= Irrespective of DCC

In a recent thread, I'm fairly sure there were references to a Dropbox-compatible client for the Pi. -- Dave in Australia The New England Convention

Fellow N Scalers, I've recently "taken the plunge" from DC to DCC. I've installed a Digitrax DCS240 Command Station with LNWI Wifi Interface. I'm running the latest version of JMRI v4.12.0 on a

I use GitHub to synch my laptop with a layout computer. You can see the repository here: https://github.com/bobjacobsen/SPShasta It’s set up with a common “userfiles” directory for panel

I am trying to synch rosters between a Raspberry Pi that I use for programming, and a PC that I use for running the layout (and a couple of? Windows Laptops that I use in different ways).? What is

Hi I have recently got a similar spec Acer, the drive is just not large enough to run anything without getting warnings even jmri, I took a leap of faith and installed linux xubuntu, took a bit of

Sorry it took me a few days to notice this thread.? It's been busy? here. I think I know what is going on here. For the advanced consists, there are several things that influence the behavior

I have been using a MINEX mini computer for JMRI. I had problems getting Win 10 updates to install also. Referring to the Minex users site, someone found that the reserved area for Win 10 on the eMMC

I have one of the Dell units. It choked on the last update also. The problem was that Microsoft insisted that the update had to be written to the boot drive which was too small. I was finally I was

Steve - OK. I'll be at the museum today and we will see what happens. Mark

Kurt, If you installed the app from the Play Store, you should get a notification from your Play Store app that an update is available. If you allow Automatic Updates, it should update automatically.

Julius: This may not apply to the Dell... A friend and I have machine with a similar configuration to the Dell with the key being the 32GB "drive." This a fanless mini box computer. The last

Dave, Yes, Peter has been working on a more modern look for the icons.? --SteveT

Hi James, I'll try again. Depending on the renderrer the message was there or not. The answers are embedded in the text. Steve G., |Thank you very much for your swift replies. Firstly, to respond

i defined my classification yard as a single location which included all the tracks that hold the cars and the departure and arrival tracks to the yard. i defines my engine yard as separate location