开云体育

PanelPro 4.11.5+Rd304cb Java 1.8.0_161 Windows 7 I am setting up my first Arduino as a CMRI/SMINI node and doing some simple testing. I defined two lights to be able to turn them on and off (very easy

Tony, ? ? My past experience with the Paragon locos was they had capacitors in them and that soaks up the short write signal.? Had to get a Track Booster to program those properly.? Using a PTB100

thank you but they i were already off , apparanently the default setting tried with them on and in paged mode. still cant read the decoder tony

Steve and Peter - One more data point on the "problem". Another club member is a WiThrottle (Apple) user rather than Engine Driver (Android). He says he has WiThrottle version 2.20 and was using it

Steve and Peter - thanks for the suggestions, will try them. Yes, I mistyped and meant 2.20.59. The problem may be a little strange. I tried Engine Driver 2.20.59 (on Tablet) at the club and it did

Hi All, And it was an "easy fix" - but only when you have the knowledge and experience to make it easy - thank you again. -- Cheers, Alastair

Hi All, This just goes to show what a newbie/duffer I am !? The drop down menu ! (duh !).? So I have changed to "basic" and saved and restarted - dadah !! - I can now edit/programme my roster -

Hi All, I have a Standalone LocoNet for detection & signals on my layout. ?It uses a NCE DCC system, since it doesn't have any Digitrax Command Stations I needed to create a "Pseudo Ground" to

I think ED could still do it, only differently. Instead of relying on momentum, make ED honour requests to change speed in tiny selectable increments with a selectable delay in between. Those two

The majority of decoder read/write issues are due to decoder/command station issues rather than JMRI. However, there are two JMRI settings that can cause errors with some decoders. In

to any of the software writters of decoder pro is there any interest in finding out why the jmri program has problems with the broadway limited paragon 3 decoders. i purchased 4 engines. 2 when put on

It did seem a too easy solution. So the non-intelligent ProtoThrottle (PT) skin remains the suggested solution. Just need to make sure that the skin can handle the same set-up (function key

The idea of more realistic train simulation when running model RRs is certainly interesting and has been pursued in various ways over the years. To get the most out of all the effort that entails, I

Your idea works fine with non-sound decoders. However, modern sound decoders rely on the differential between requested speed to the decoder and actual track (motor) speed to change the sound samples

Hi. For those using Tam Valley Depot QuadLN family products with JMRI and attending the NMRA National Convention, there will be a QuadLN Users meeting on Friday morning. Planning a live demo of a new

Mark, I have been looking at the bug report and so far can't see what the problem might be. It is a bit of a stretch, but can I ask that you get your friend to clear the data for the app then try

Bob,? I would like disagree with you on point 4 of your recent post. I believe that the EngineDriver app (EDa), or a derivative, could be written in such a way that it would not require a decoder

Yeah, I'm seeing 10 entries for the programmer Format. Roger

I occasionally see that sort of error message where the selected programmer file name gets corrupted. Usually it can be fixed by simply selecting a different entry from the dropdown list, saving and

Hi Mark, hopefully you are referring to 2.20.59. I see a series of crash reports from a single device yesterday. Looks like a hardware issue with the tone generator. We're looking into it. The fix