开云体育

Of course you are right Walter but till my money turns green it's a good cheap fix Since my renter moved out of the other side of my duplex I've spent all my extra cash on repairs and make ready for

One answer to you problem could be the "Presto" card that was just demo'd at the 2017 Bay Area an St Louis RPM meets. It has dispatcher remote override, and dispatcher remote disable of any number of

Craig, A small hint for your puzzle is found in the source code file named "jmri.jmrit.automat" at lines #69-72 if (inputs.length <= 0) { log.error("Siglet start invoked, but defined no inputs");

We're going to try to build and release JMRI 4.9.3 this coming weekend to resolve some startup issues and have Java-9-compatible install and run scripts. If you'd like an early look as we work toward

The rubber band will deteriorate over time! You should fix it the right way by replacing the broken part!

JMRI cannot read Loksound decoders as fast as the lokprogrammer does because the lokprogrammer does not read CVs. There is a special read/write option that ESU has not shared with the JMRI team. Not

Hi All, go to stevetodd. com he has RPI image that you can download and install on the RPI and connect to several DCC system as well as Windows computers. You may have to download other software to

I drew my turntable on the background using EzDraw. Then I put a push bottom and a light on each track. All the logic is done with routes and goes out to the layout via CMRI to an SMINI that is

Thank You Paul. I knew about the Linux option but I have a reason to ask the Win10 question. O well. TCC:} Talmadge C 'TC' Carr Sn42 and Hn42 somewhere in the wilds of the Pacific Northwest

I like those ideas... However there are 3 to 7 switch machines per panel. Is there a way of running them all through one dpdt switch, rather than doubling up on each tortoise switch...???? Thank you

Ken, That too will work. Mark Juett Ace Services LLC Your First Choice www.modelrailroadbuilder.com Begin forwarded message:

I would like to put a turntable in my Panel using the Panel Editor like the one used in Layout Editor where you can click on the ray tracks to move the table. I would like to use the Panel Editor to

One layout the ‘key’ was a ?” phone plug. Each crew member carried one. The plug was wired short and it would make a circuit when plugged in. That gave local operation. Nice thing was it was

Yes Paul That was the problem It was a loose connection A friend sent me a photo of his simple fix Using a rubber band stretched over the cord and around the Loco buffer body All is well now Thanks

Sorry, I didn't think that jmri was giving a continuos signal to the Tortise. Sent from my Verizon, Samsung Galaxy smartphone

The I have a raspberry pi with windows 10 installed, but windows 10 for the Raspberry Pi is the IoT edition. This means the options for installing software on the device are limited, at best. The

RaspBerry PI runs LINUX, not Windows OS. There is a prepackaged image of JMRI from the author of Engine Driver SW for the PI.

Tom: I agree that it takes some time to write the sound file on ESU decoders but, (and yes I know its proprietary hardware) when you use the Lokprogrammer to read the decoder settings it takes less

Has anyone ever tried JMRI on a RasPi running Win 10????? Talmadge C 'TC' Carr Sn42 and Hn42 somewhere in the wilds of the Pacific Northwest group_list@...

Ya, but if they accidentally let it go while moving over the switch it's going to return to whatever position the DS had it set to originally... Can you say "break out the Dixie cups!"???? JD