开云体育

I have a Lenz based system using signal mast logic and full occupancy detection using Lenz and LDT kit. I can run dispatcher and autotrains on a simple loop, turnout and signal heads all change and

same solution. Total isolation with fiber optic. I do not know what locket uses for a transmission media. RS485 2 wire, ??? There are isolators for all industrial networks. If nothing can be found for

Those system names ( IH:SE8C:"LT257";"LT258", IH:SE8C:"LT259";"LT260"...) are correct. Peter

I am new to model railroading, and in the beginning stages of setting up an N scale system. I will be using Digitrax products so I will be using the SE8C for signal control. I have finished R.

While the Sound Value decoders have reduced features than a Tsunami, I wouldn't say it has very limited capabilities. They are actually very good decoders. That said, the OP is talking about the DCC

No, he is using Loconet through the piping.

Thank you everyone! I found it!! Jay

Harry,?I have 1 Bachmann soundvalue locomotive, ?a GP40-2, it came with a Tsunami OEM, ?and VERY ?limited capabilities, ?but it does support speed tables.It has pre loaded ?ones, as well as user

The only way to stop this is with total isolation. It sounds like you are using ethernet for the network connections. NEVER EVER leave a structure ( house ) and go to any other structure and run

As a first hit (no pun intended) I would run an earth wire down the inside of the conduit and use it to connect the metal boxes together. Use a heavy gauge wire such as used for connecting house

Look Here: https://enginedriver.mstevetodd.com/ jmriusers@...> wrote:

WiThrottle is an iPhone app. As listed below Androids use Engine Driver. Both work with JMRI software Kurt [Non-text portions of this message have been removed]

Engine driver

Yes it,s called engine driver.

I can't find WiThrottle for my Android phone. Is there an equivalent for Android? Thanks!! Jay

This may not be related to JMRI but I am sure some of you are using the Digitrax Loconet electronics and some may have experienced this so I am putting this on the board for discussion. I have have

Steve, I've done some SE8c bench-testing for the concept to use the "LDT LS-DEC" signal head type. The concept is sound, and seems to work well. I tried the concept with the SE8c in "fourth aspect

Really glad you found some issues Dave. I am also seeing a 'null' when trying to set routes and it seems to have stopped working again... maybe something I edited wrong in the XML... I hope not. I

Bob, Thank you for this explanation, I've never seen it explained that way! You're right, I assumed 4 states meant 2 bits, either of which might be 0 or 1, every time. I truly appreciate your

Harry I only have one Bachman Locomotive and the decoder that came with it was a very poor quality decoder. ?I wanted to add sound to the locomotive anyway so I replaced the decoder with a Soundtrax