开云体育

Sorry, I didn't mean to ruffle feathers here. As to which "thread", I thought by replying to the immeadiate email it was obvious..thay's what I dislike about Yahoo..it disconnects story lines

Mike, Did you upload a new copy after removing all of the signal masts? I am not able to find it. The one from this morning is still there. When you copy JMRI to /Applications, are you selecting

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Understand. Thanks Jon.? Sent

Hi I appear to be having problems now with 4.8 with my matrix signal mast entries that have been working fine in 4.6 but now I'm getting "Invalid content was found starting with element 'outputs'. One

Fraser, I guess we will have to agree to disagree. How will JMRI help when the layout is not using JMRI. Like in a Freemo set up at a show. Or when a person turns on a club layout to run trains but

Larry, If you think about it, a block can only have one sensor and one sensor can only mean one block. Since it is one sensor, those track segments must be one block because you can't tell where

David A frog juicer is the tech geeks expensive way of solving a problem that doesn't really exist and everytime it activates, the spark caused by the short will slowly but surely pit the rail surface

Perhaps this changed since I upgraded to the latest version of JMRI. I have a segment of track, short straight, turnout, short straight, which I want to report all as one detection block. in Panel

I’m going to give a general answer, in case others with similar issues read this. Although JMRI release notes are long, it’s good to read them, particularly if you’re having a problem. The JRMI

/On 7/24/2017 9:26 AM, Steven Burns sburns2302@... [jmriusers] wrote:// / The DB150 does not have a programming track (i.e. no readback), only can POM (program on the main). This from the spec

That's the way I'd go… In the Sensor table create an internal sensor then in the layout editor choose the "Sensor Icon" (round) radio button and then the internal sensor in the combobox dropdown

Hi Dave, I deleted all the signal masts. They were an experiment that I never completed and they are not used. I just use signal heads now. I upgraded again and I got a 2nd parse error. Error on line

Steve, Well, rats. Thanks much for the quick response. Steve. Sent from Yahoo Mail for iPad On Monday, July 24, 2017, 12:13 PM, breezlys@... [jmriusers] <jmriusers@...> wrote: Steve,

Chris, You've placed restrictions on the departure track. Remove them by allowing the track to service any destination. Dan

I believe that you can only send complete trains to and from staging. If you are only sending cars then what you are trying to accomplish will not work. As an alternate you could designate one of the

Steve, The DB150 does not have CV readback ability (it lacks the required circuitry). JMRI cannot "'fix" that, so to read CV's you will need to obtain hardware such as the PR3 which supports that

Peter, thanks! That worked!

?, I get a different validation error: SPASS1 is a duplicate signal mast user name. I loaded the file using 4.6 and renamed one of the user names and saved the panel xml file. I was then able to load

Dave, thanks for that clarification. I DO use the SPROG3 but always just considered it a type of interface. Didn't realize it was actually a DCC Emulator device. Go figure. I prefer the SPROG3 because

Your computer cannot program decoders directly, neither can JMRI DecoderPro (DecoderPro is just one particular part of the one JMRI program). The only way you can program a decoder is with DCC