开云体育

Correct. A fuller explanation at: <https://sites.google.com/site/markgurries/home/nce-info/nce-consisting> -- Dave in Australia

I have been building up my proposed layout in PanelPro for quite some time now and have run ito signalling problems on several occasions making me strip lots of bits of track out and start again. This

Further testing has found that the stack appears to not work. When I set the stack to be available, it does not appear to respond to the XpressNet command to view the stack. The response given back is

Paul, sorry for the sort of Hi-Jack, have you had any dealings with the DR5000 by Digikeijs and if so, do you have any knowledge of its XpressNet implimentation?

I checked and 7.4.2 was the beginning of it, but I think there were more changes a bit later. But I'd ask if you think you see mention of it in the notes. Sometimes what gets entered into the notes is

Hello Z21 Users, As I mentioned in an e-mail a few weeks ago, I was acquiring a Roco Z21. That unit arrived, and I've had a little time to work on some of the issues reported in JMRI's Z21 support.

Greetings. I have the current production release of JMRI, I have windows 10 and the current update of JAVA.I have Digitrax loconet via RRcirkits locobuffer. The layout has been running fine for

Hi Keith, The layout is built. I just need someone to do the JMRI integration. I am located in Los Angeles, so this would have to be done remotely. A JPG of my layout is attached. Thank you and best

Scott, Are you looking to have someone build your layout, or your control panel, or both? Having spent the last 5 years or so building and refining my layout panel, I might want to give yours a try.

When using advance consisting with NCE, what you say is usually true, sometimes you have to adjust, I think, CV21 and CV22 to get the lights right. However, with NCE you run the consist with the lead

Perhaps the documentation would be far better if we as model railroaders were to pay the volunteer developers what JMRI was actually worth, but then it would not be as far advanced as it is now.

up_sbrown, thank you for the nice words. Yes, I know all that. I do read the release notes. I do know these are experimental test releases. I wish there was a better attention to detail when it comes

Hi Peter, Sorry I haven't responded sooner, been covered up and out of town. Do you remember what files you actually changed code in? If so, here's my suggestion to make your changes visible. 1) Fork

Hi Ichi, Thanks for the feedback. Thank you, jmriusers@...> wrote: -- Thank you and best regards, SCOTT J. MELLER

Thanks Dave for much appreciated response I opened the file with an xml Editor and fix the problem, now everything works fine shows the right Tables and creates no IBs Blocks. I'll continue with the

Ken, Thanks for the explanation. I now know how to fix the issue without using a text editor. Did I miss this change in the Release notes? Marshall Sent: Monday, June 19, 2017 7:23 AM To:

Scott, Here's a few tips. Ensure that the designer is in your area. Ensure that he provides you with the supporting documentation. Ensure that the deliverables are understood and noted. Ensure that

Hi Stu, Others could explain the _benefits_ of SignalHeads vs. SignalMasts better than I, but inside the Dispatcher code, there are some unavoidable differences in the logic. I use SignalMasts, so I

SteveT, I found a plugin to compare the Project that AndroidStudio imported to the original Eclipse Project. The import rearranged the folder structure and is telling me that the is over 1700

Setting up consists and decoder consist settings with NCE systems are quite different from any other brand of DCC system, due to special helper features in the NCE command station. The correct way to