开云体育

Peter, Yes, the panel worked the same. The solution was so simple I didn’t even consider it. Saving the panel removed the leading spaces. Something to remember in the future should I see the

This is fixed in JMRI 4.7.x. You will either need to install JMRI 4.7.6 or wait until 4.8 is released and install that version. Randall

2017-06-19 09:59:12,622 util.Log4JUtil INFO - * JMRI log ** [main] 2017-06-19 09:59:13,633 util.Log4JUtil INFO - This log is appended to file:

I've put my code on github: https://github.com/oschreibke/OpenLCB.git https://github.com/oschreibke/OpenLCB.git Hope it helps Regards Otto

To all, I booted Decoder Pro after shutting down the PC and rebooting it and the ops mode and main programming remained green. Decoder Pro is now working successfully. I guess that something got reset

Hello, I would like to hire a JMRI PanelPro expert to build my layout in order to control turnouts and routes, occupancy to come in the future. I have my layout in Anyrail which I believe is

Yup, the new times work. Thanks!

I had to reinstall JMRI because of a Windows 10 glitch and I updated to newest version. Previous Decoder Pro and Panel Pro worked. I have same hardware settings as previous Decoder pro which worked. I

Vince, I am not able to re-create your magic block problem. For now you should be able to go to the block table and delete the block. The "Additional Name" field is used to assign the second turnout

Steve, This is how I see your situation: ---> layout ---> SM ---> yard entry block ---> VM ---> yard tracks VM never changes. It is set to a constant aspect. SM changes between Stop and NOT Stop based

Issue submitted to Github. Peter

Here is a console print from the Single CV Programmer failure: 2017-06-18 13:27:25,701 util.Log4JUtil INFO - * JMRI log ** [main] 2017-06-18 13:27:26,504 util.Log4JUtil INFO - This log is

Hi JMRI users And Developers' . I am Vince Filardo and have just updated to JMRI version 4.7.5 on Windows 7. Installation went well no problem setup preference and startup Panel Editor's LayoutEditor

Single CV Programmer won't open. I stepped down to 4.7.5, same issue. I then stepped down to 4.7.4, it works. So something is broken for this between 4.7.4 and 4.7.5. Alain LM Bob Jacobsen

Hi Dave, thanks for the reply yes using signal mast logic and have set a virtual signal at the end of the block controlling the previous signal. When the virtual mast clears won't that just set the

Thanks, Dan. That's what I figured about the car wait counts. Will get the latest version and retry re timetable. Jon Nicasio Northern Rwy

Steve, The solution depends on how you are controlling your signals. If you are using signal mast logic, then you use a virtual mast that is always Clear (green) set as the target mast for your yard

Hi Ron All my routes are built using the route table. They operate and set various turnouts. I have about 12 routes available Select main menu, select tables, then routes These are saved within your

The custom audio files and scripts should be saved at your "User Files Location". Selecting "Help >> Locations" will show you the JMRI locations. If you click on the "Open User Files Location" button,

Marshall, I could be wrong but if JMRI normalized the name when the panel started, the panel should have worked the same. All you would need to do is save the panel to retain the change. A developer