开云体育

Hi Ron All my routes are built using the route table. They operate and set various turnouts. I have about 12 routes available Select main menu, select tables, then routes These are saved within your

The custom audio files and scripts should be saved at your "User Files Location". Selecting "Help >> Locations" will show you the JMRI locations. If you click on the "Open User Files Location" button,

Marshall, I could be wrong but if JMRI normalized the name when the panel started, the panel should have worked the same. All you would need to do is save the panel to retain the change. A developer

I noticed the following message in the console log and went to remove the “leading” space but was unable to do so. 2017-06-18 08:57:57,856 util.Log4JUtil INFO - * JMRI log ** [main]

Hi Manu, An overview to NMRA LCC ( = OpenLCB) can be found at http://www.dccwiki.com/Layout_Command_Control http://www.dccwiki.com/Layout_Command_Control, and a video (1h15) at

Internal are things that only JMRI knows about. It can be something that is set like an Internal sensor that indicates something has happened or could be that it being set causes something else to

What is the difference between internal and loconet?

Hi All I know this has been asked before but i can't find a definitive answer so sorry for asking again ! Im using block detection and BR 4 aspect signalling and I want the last signal on the layout

I just joined the JMRIusers group to interact with more model railroaders. I design and build all the DCC electronics on our Sun City layout in Georgetown Texas. It now consists of 22 modules

OK, but I want to avoid the one node-one sketch thing ;-) My idea is more along these lines: you plug your equipments on a generic node, you do the setup through JMRI (this I dont know how to do) and

The same warning applies to Windows Defender on Win10. Just click on the more info button, then accept to run it. Alain

When I create the audio wav sounds by creating buffers and audio sources when I have them created if i close down Decoder Pro Panel Pro the audio files are not there anymore , I have tried saving them

If i were to create a script in Word would it work in Decoder pro, in Routes and were should I save it to to be able to access in the script tab menu in routes . I guess what I am asking what folder

Hello and I am in need of help in a couple of areas ? I am using the latest version of java and the latest test version of JMRI Decoder Pro I want to play wav sounds when I set my routes , I have the

I dont think MTH has a lock, there is nothing listed in the manual, they are a dcs system, not dcc. Dave Hastings

Try the latest test release 4.7.6. You can now set train departure times to the minute. Car wait counts are decremented every time a train that can pull the car is built. It is not restored if you

Depends on which MTH model you have. The newest models with the DCS/DCC decoders work fine on Decoder Pro. The older P3 models do not. With an older P3 model you can program the long address on the

Hi It's not locked by any chance, the new decoders can do that. Steve

Its not just you being lucky, LOL, You can set cvs 3 and 4 and the address cvs, thats it. Everything else you meed an MTH system to change anything else. Dave Hastings

I'm working on my first HO layout and am exploring all my options for DCC controllers. One feature that I'd really like on a hand held controller is a single button that toggles the direction each