开云体育

On Friday 04 October 2002 02:40 pm, Bob Jacobsen wrote: > At 1:56 PM -0700 10/4/02, Mike Davison wrote: > >I am running DecoderPro 1.0 on Linux with EasyDCC and SoundTraxx DSD-150 > >Diesel decoder.

Thanks for your forbearance while I learn to use the system. Earlier I was helped along with a basic question about LocoBuffer, and that help I got allowed me to get it working (it just needed power,

Bob, Just checked my decoderIndex.xml file. near the top of file: <mfgList> <manufacturer mfg="Throttle-Up" mfgID="141" /> further down: <family name="DSD diesel" mfg="Throttle-Up (SoundTraxx)"

Could you check that the String for the manufacturer name is the exact same between the mfg="" part of the "family" element (the s

I am running DecoderPro 1.0 on Linux with EasyDCC and SoundTraxx DSD-150 Diesel decoder. When I click the ident button I get Found mgr 141 (Throttle-Up) version 14; no such decoder

Thanks to those who generously pointed me in the right direction. I appreciate your prompt response. Michael McCaffery ___________________

Michael, LocoBuffer information is contained in the files sections of either the Digitrax list or the Loco_Net Hackers list. It shows the connections and the jumpers. Jon Miller AT&SF For me

... You do need an external source of power for the LocoBuffer. I haven't looked at the instructions for a while, so am not sure now much they say about it. I use a 9V AC "wall wart" transformer,

Michael, The LocoBuffer interface requires its own power supply in order to work. Can't say for sure what the two wires that stick out of the unit are for as I assembled mine. As you suspect, they

As a newbie to both DCC and Decoder Pro, please make the usual allowances for my questions, which may have been covered earlier. I'm attempting to set up a LocoBuffer (just purchased assembled from

I've used a Keyspan PDA adapter to do this with MacOS 9 and MacOS X. Works fine! What type of Lenz system do you have? There's been some confusion about whether a Compact (which I think is quite

I am using a G3 Powerbook and want to connect to a Lenz system using the LI100. Is there an RS232 to USB adapter cable I can use? Or is ther some other way to connect a mac to the Lenz

Test done with fresh T1 decoder. Use programming track. Paged Mode Decoder installed, Ident. Found mfg 153 (TCS) version 22 not defined Changed to T1 and opened Programmer In roster Entry changed ID

Sounds like I might have broken the logic that keeps track of changes. I'll check. Just to make sure I understand: It prompted you that there were changes that had not been stored to a file, right?

Bob, Reading one panel is fine. It will also write one pane. But then I used to (change one pane) go to the Roster Entry pane, do a save and exit. Now when I try and exit it tells me I didn't

It's not supposed to be different. But I certainly could have broken something. What happens if you try to read just the one pane? Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@...,

You are one very very very lucky guy ! <grin>

Still testing but I seem to remember I could change one pane and then do a save and that was it. It appears that this version wants me to read the entire program and then do a save. Is my memory

Peter, I never realised it before, but that will explain why I am nominated to do all the interiors for the buildings & passenger cars. Sorry fully booked up for next episode of Lord Of The

On the Digitrax FX3 series the Digitrax pane has a control for F5 to turn BEMF on or off. As far as I can tell F5 doesn't do this anymore for this series. Is this correct? Jon Miller AT&SF For