开云体育

Steve, I'm now facing a different issue. Using three transits with two locomotives, a t the end of each transits: Transit A runs loco A then load transit B Transit B runs loco A, then

Thank you for that suggestion, that is a very handy app. Beats lugging a laptop over there, at least for the initial survey. I'm finding the 2.4gHz channels swamped with stuff, unusual for a rural

You are most likely experiencing “Command Station Turnout Command Rejection”. I see BillyBob already provided a link to the JMRI webpage that covers this. Things to think about: Is Track

Thanks. Looking at that now, but I made need help with it.

Attached files are here.

See https://www.jmri.org/help/en/html/hardware/loconet/Digitrax.shtml#TurnoutCmdHandling .

I’ve been using a script I copied and modified from script examples a couple of decades ago (attached) which “for turnouts in turnouts.getNamedBeanSet() :” sets all but a few of my turnouts to

Steve Mac It depends on how you are stopping your train. If the block lengths and train lengths are accurate then: When not using speed profiles:, and not using stopping sensors: The train stops if it

Steve, Someone might have a different opinion or answer for your problem.? i would wait before modifying your layout. Roger

Thanks for the insight. I wish I knew this before setting up blocks. I thought train would halt if "held" irregardless of length. I can combine this block with the preceding block below but it would

*** .rule *s* *** the ess is esmportant on the filename.

This is what I have in my /etc/udev/rules.d/90-locobuffer.rules file: SUBSYSTEM=="tty", ATTRS{product}=="LocoBuffer-USB", ATTRS{serial}=="FTNO3P86", SYMLINK+="ttyUSBLB" SUBSYSTEM=="tty",

Dave, Thanks. The problem is that it doesn't work for me. I have the file: /etc/udev/rules.d/90-serial-ports.rule With the line: SUBSYSTEM=="tty", SUBSYSTEMS=="usb",

Daniel, Here is what works for me. SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTRS{interface}=="LocoBuffer-USB", SYMLINK+="ttyUSBLocoBuffer" Dave Sand

On April 9, 2025 5:32:04 AM GMT+05:30, "danielb987 via groups.io" <jmri@...> wrote: >I have a LocoBufferUSB and a FT232 serial adapter and I need permanent links for them, for

Quick details: 5 ports designated in config. Loconet (Com4), Loconet2 (Com5), Loconet3 (virtual), Programmer (COM6), Command Station (COM3). When trying to program/read with DecoderPro, it

Tony What you describe sounds like you are using "head only". Try loco by itself with the correct length and "full trian" detection. Steve G.

I have a LocoBufferUSB and a FT232 serial adapter and I need permanent links for them, for example /dev/ttyLocobufferUSB and /dev/ttyTurntable . lsusb shows: Bus 003 Device 005: ID 0403:c7d0 Future

Paul, If you upload the version without the proposed fix, I can take a look at it. Dave Sand

I posted about a solution to a looped layout SML validation failure when using layout editor paths, block and turnout details. This worked until we started making updates to the layout. The original