开云体育

Now in JMRI GitHub as issue #13945 https://github.com/JMRI/JMRI/issues/13945 And from there, should find its way through approvals to a JMRI test release. - Nigel

It can be done in Java. I fact, I am doing something in Java on topmof JMRI that has train lengths (standard jmri doesn't have it for running trains, only for the relatively stand-alone

Don’t forget that Soundtraxx offer Bluetooth-controllable decoders as well. But also remember that a lot of us like to drive the trains and operate the layout entirely manually. Automation holds

CAN stands for "Controller Area Network," a peer-peer network standard. -- Andy

Operations has a max train length value. This is used to limit train sizes between switching locations. Dispatcher has a max train length for automatically controlled trains. I am not aware of any

That JMRI has the facility to store the train length. This would allow the calculation of the position of the end of the train.

What do you mean by "record its length"? Dave Sand

yes adding further physical detectors is a solution.? however surely there is a software solution?

Here a method used by the modular Free-mo groups that do signaling. It is call MSS for Modular Signal Standard. It uses block track detectors to see the locos and anything drawing power from the

Peter, Just a couple of things I know about relating to some of your questions: * I believe Hornby have implemented Bluetooth control in some of their recent TT scale locomotives, using their HM7000

To ensure the whole train is considered when assessing block occupancy by current sensors and not just the current drawing locomotive the standard solution is resistive wheelsets. However JMRI knows

Closing the loop on this thread. Backed up the Pro using Time Machine. Got the Air today and loaded up viaTime Machine. DecoderPro works great as always. Thanks for the help! Fran Giacoma

Got it - I missed the Car Roster selection!

Thanks Dan,? I am already using your second suggestion,? I hadn't thought of using track pools.

Help: https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#CarRoster

Bill, Open the Cars window from a location, then in the Cars window, under tools, print or preview.? Only cars at that location will be printed. Dan

George, That is an interesting question. Here is a simple LogixNG. It waits for a sensor state change and then replicates that change to another sensor. Here is the same logic using

Bill, One solution is to pool your C/I tracks with "general storage".? You would set the minimum track length for each C/I track to 8 cars.? Now if the program needs more, it can grab the space

I would have thought so also but it isn't an option in the show cars window from a location.

Heath, My two cents. BLI decoders (Paragon) only show up in BLI locomotives and the difference between steam and diesel can be determined. BLI has a common assignment for functions that they