开云体育

I have a few observations: * In Preferences -> Defaults, I see two entries for Marklin-CS2. ?The second doesn't have any radio buttons selected. Probably just cosmetic. * Tools -> New Throttle allows

I use virtual classification tracks in my yards so that I can see which cars are potentially assigned to outgoing trains.? This build I noticed that one of my trains was oversubscribed by 100% so I

The logging function records all car moves.? operations\logger\[date].csv

Bob, It works perfectly! ?Thanks! I really appreciate the effort you put into JMRI, especially the support you give to obscure (in the US) hardware. Regard, Gopal

Clarification For car type I can enter ‘boxcar-materials’ but when I try to enter car type ‘boxcar materials’ it limits me to 12 characters. -- Mike from Calgary

Could you try the installers at https://builds.jmri.org/jenkins/job/testreleases/job/bobjacobsen/218/ please? I don’t have a good way to test a CS2 TCP connection, so I’m not sure these will

All, I've gone back to using my standard Basic Signals Masts and all is good.? Just to be clear, the B&O masts were looking at next THREE blocks in determining a stop aspect. Roger

...and this can happen on all of my panels.

...note that I using the Fully Kiosk broswer on samsung android tablets.

Team, I've got a bunch of Control Panels that I view on Tablets all working fine and there is a slight annoyance that occurs when I inadvertently swipe the tablet screen and the whole panel moves

Robin, I think I had picked "Approach Medium" in the B&O mast aspect.? I unchecked the others.? I didnt see one that had just "Medium" aspect. Will delete the masts and choose a simpler

Hello, I would like to use the TCP protocol to connect to a M?rklin central station 3 (or, in my case, ?a surrogate). The current JMRI implementation uses UDP which has been deprecated in favor of

Roger, Take a look at the Signal definitions for your chosen system at www.jmri.org/xml/signals <http://www.jmri.org/xml/signals> . Then pick the exact signal mast you put on your panel and look

All, I entered a new mast to my layout using the n3ix signal board with DCC control.? Using B&O 1960 position targets.? Normally is just use standard signal masts that looks ahead at next block,

Lets say I wanted to follow one car on my layout as it is moved on and off the layout from storage to industry back to storage back to industry, etc.? Is there an automatic way for JMRI to do that?

Thanks Dan I shut down JMRI, then amended the operations.XML file, saved the file then restarted JMRI but it didn’t take. JMRI 5.6, Java 11.0.17, Windows 10 Thoughts? -- Mike from Calgary

Paul, My understanding is that the message occurs when it is not possible to find a "next" signal head to be protected. If you upload the layout data xml file to the group's ProblemsBeingWorkedOn

Peter, Based on your description, you have different "profiles" for DecoderPro and PanelPro. And it appears that the different profiles have different layout connection definitions. The profiles

Don, I did nothing of the kind. Wouter [email protected]> wrote:

Last moved by the program.? From the help: Moves, Wait and Last Time Moved You can edit the number of times a car has been moved by the program and the car's wait count directly from the "Cars"