开云体育

OK, now added to my local file. I've also removed the comments around the MS540E24 decoder, as I think its likely available. They'll be in the update when it goes to the JMRI approvals

Can you also add the new MS decoder MS591N18 CV250=15 ? The type of decoder can be read out from the value of CV #250 if required: 1 = MS500 2 = MS480 3 = MS490 4 = MS440 5 = MS580 6 = MS450 7 =

Yes, of course CV837 and CV843.

And you’ve been answered before: https://www.jmri.org/help/en/html/doc/Technical/JVMCapabilities.shtml Bob — Bob Jacobsen rgj1927@...

The JAVA debate is certainly separate from the JMRI one Unfortunately, JMRI does not control the release cycles of JAVA, but generally any a that are taken advantage of tend to make coding simpler

Bill, Thank you.? Changed the USB slots around and got it running Thank you for your support. John Greenwood

All, Wouter is not the first to conflate "some extra, additional, or improved feature" of JAVA itself, with those of JMRI. The latter is certainly documented, but it is the former which I challenge.

Mick, I haven't.? It was JMRI saying it could not contact Command Station (306). John Greenwood

Thanks for the reminder. Yes I know they're relevant (CV837 and CV843 not 841! ), and they need to be part of the same "pane" in the JMRI programmer interface. I'll update those in the file for

Nigel, Just a little tip (but you probably already know that): The two CVs 837 and 841 for deactivating scripts are also part of this CV overview.

Am 13.03.2025 um 23:00 schrieb Dave Sand: I agree. Another test could be to run the script AudioExample.py. The JMRI System Console output would probably give a hint. Thank you in advance. Klaus

You don’t connect the SPROG to another DCC system at all, ever. It connects to power, computer and track. It IS a DCC system. The track is a program track when in JMRI SPROG mode, and a running

Adding to Wouter, the further “behind” you get from current, the bigger the task (and risks) there will be if/when you DO need to upgrade My oldest environment is running Windows 8 (still) and I

The SPROG only turns on the Track Power momentarily during? all the programming activities. This is designed? to ensure that a Programming action on a newly installed or connected decoder will not

Thankfully I can now connect to my EasyDCC command station via my Windows 11 laptop. When opening the DecoderPro app I'd always clicked on 'My JMRI Railroad'. However, when I now do this my roster

Good evening Moderators and group: My setup: Win10, Digitrax PR3 Digitrax DCS210, DCS50 (throttle/ booster only), DT400, DT500 SE8C x2, BDL16 x2, SE74 x2, DS64 x4, UR90 x2, UP5 Signals are Digitrax

Don, For new and improved features, the releasenotes are the place to look. Also, there is no shame in being happy with an older release. Having said that, it's nobody's task to convince people one

All, I think there are more than anyone is willing to admit still running JMRI 4.26. Uninstalling and upgrading your JAVA is just the beginning of PITAs involved (not to even mention Windows

Dennis, An interesting test would be to add the bell sounds and see if the problem returns. Dave Sand

Thanks Dave. I'll answer inline below. Cheers, Dennis Drury Dayton, NV The miracle is this: the more we share the more we have. Leonard Nimoy [email protected]> wrote: I used Notepad ++