开云体育

That was the help that I needed. I posted it on EasyDCC Group and found it right away. Someone else replied that I might be in the wrong forum and they were correct as well. I do apologize once

You are absolutely correct. I apologize for my error. You may delete any and all references. TTFN *DAN* "I have tried to know absolutely nothing about a great many things, and I have succeeded

I did do a straight over the top update. .? I did get a conflict message up (Guilty as charged) but did not make a note of what it said! (Stupid) Good news Steve's rebuild worked, so all good

Wiring has nothing to do with JMRI and should be taken elsewhere. -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.3plus, Java 21.0.5 JMRI Users Group Moderator ( /g/jmriusers ) JMRI

The numbers are retained from an earlier drawing that I first posted. The words inside the Red Box are: This area encompasses two reversing loops. I am unsure as to how, where I should create gaps and

Peter, Did you change the COM port number in JMRI after changing out the USB-Serial device? This sort of change with Windows usually causes the COM port to change numbers. Dick :)

That is all I find as well. Someone in the group found it for me before as I could not find it then. I was able to get to it and add comment (I think). I don't know who sent that, it might have been

I would think that I added my topic in Wiring for DCC but do not find anything there. I remember when I first decided to send the message Wiring for DCC made the most sences for an area to use. My

First, I don't understand what you mean by following the links on the WEB SITE. I have looked through all my mail including the Trash Bin and found nothing except the Manifest Creator related

How did you upgrade? In place overwrite, the normal method, or something else? I suspect you’ve just lost the pointer to your data. I just update over the top. Always have, always do, and have

Thanks for responses - a most frustrating exercise, indeed!!! No storms here. I've removed and re-loaded JMRI 5.11 after trying 5.10 again with no luck. Installed the new USB to DB9 serial cable and

Dan, Your track plan is interesting. That inner portion would not need any reversing if not for the connections labelled 1-2 and 3-4. So, I don't know why you have two stars at the left and right

We need a little more information Louis. What's the exact message? Java version, JMRI version? The more you give us, the better. <louis.grundman@...> wrote: -- John Griffin The

Thank you Peter & David I have been using the new loco with HM7000 via the HM|DCC app. This works very successfully however my preference is to have one control system rather than two, hence my

Hello I have a message that says java encryption what does that mean jmri will not open? What do I have to do ? louis

If a car that has been delivered is then emptied, and another location in the same neighborhood needs an empty car to load with goods to send on . . . it seems quite reasonable for said car to move

Hi Bruce Well, the objective of the switching layout is to create switching moves! I’m wanting to be able to run 1.5-2 hour remote operator sessions, so lots of movement is the goal. For some

The only topics created by you in the last 2 months are this one and one about a Manifest creator update. You must be looking in the wrong group. -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.3plus,

Hi Dan, I expect you are mixig up forums i your head. I have every (non-operations) post in nmy local mail archive, and there is none (either in jmriuser, jmridev, NCE-DCC, Sprog-dcc or WiringForDCC)

Heath, I've also posted about CV 217 settings, but I always use a programming track. And my programmer is a SPROG 3 (while my layout track power comes from an EVOXD Digitrax system). My procedure is