开云体育

No I did not, thanks.

Tom So, how did I get on? Well, interesting results

Did you not see Steve's reply? /g/jmriusers/message/216964 -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group Moderator (

Anyone? Hi: I started using my Android phone as a throttle, and saw that in the Engine Driver preferences I can access routes. However, all my routes show a status of "unknown," and when I select

There is a Digikeijs group on groups.io ( it now also includes YaMoRC -- a new company started by the original programmer for Digikeijs). Note that the DR5088RC has a rated sensitivity of 10 to 15

Dave, My code will create Sensors with systemName "xSnnn" and optional userName "xxxxxxxx" based on splitting the text entered into AnyRail Section names. I'm leaving the Block systemName as

Steve, Since block system names have no meaning, is the system name for the block going to be used for the sensor system name? Dave Sand

I have an ESU command station with the following adapters: 1. LNET converter, Order number: 4 2. EcosDetectorStandard, Order number: 2 3. EsuExtention plugged into the Detector 4.

Steve, What you are suggesting certainly should require only an example or two to explain. For the examples provided in your note, the presence of a string of numeral followed by the first blank as

Dan, OMG I have been looking at this thing for like the last six months and I can't believe it was as simple as needing to make sure the location is served by both east and west trains. I just made

From your build report: Find destinations for (ATSF 95561) type (Flatcar) load (E) at (Springfield Yard, B Yard T1 (T-567)) Route (T-567) id (98r8) no set outs at location (Shelbina) Searching

Hi Pete, I am so sorry for the confusion. I've uploaded what I believe are the correct Build Report and Manifest files for the Mina Turn. I did as you suggested and checked both East and West for the

Sorry I haven't gotten back sooner I have tried the suggestions that were offered on the last build report. It looks like I am still getting the same issue. so attached is a new build report.

Hi Tim, You are now well away from jmri, and I'd strongly advise you to join the wiring for dcc group (w4dccqa) in addition to this one. Wouter

Hi Perry, Do your Routes have sensors selected for "Sensor that Activates when all Route Turnouts are correctly aligned (optional)". That is how the JMRI WiThrottle Server decides to send a state

Good day, I have been studying this web page to figure out how to modify my Peco Electrfrog turnouts. Pretty straight forward. I have also been studying this youtube video.,.....

Hi: I started using my Android phone as a throttle, and saw that in the Engine Driver preferences I can access routes. However, all my routes show a status of "unknown," and when I select the route,

The total pool track length in this case would be 135'.? The program would only use that amount of track no matter now many industries were using the same physical track.? In this case, no more than

On the PanelPro side, look at https://www.jmri.org/help/en/html/apps/PanelPro/GettingStarted.shtml Dave Sand

Good morning Jeremy, Understanding JMRI.............. There are some very good videos on learning JMRI at youtube.com I would start with the videos by Larry Pucket AKA the DCC guy, His videos are very