开云体育

@ahouse3761 can you try "RailDriver (built in)"? It's working fine on macOS and it should (in theory) work the same on Linux.

Quick note to "RailDriver (Built In)" users: When I implemented this I followed the documentation ( https://www.jmri.org/help/en/html/hardware/raildriver/index.shtml ) with one exception: the "Four

Ken, Help >> Window Help: The Reorder button is used to changed the order of the conditional variables. This button is disabled if the Logic Operator is set to Mixed. Dave Sand

The "RailDriver (Built In)" is working as expected (on macOS). In theory it should work for Windows users also however in practice I have received reports that it doesn't. Not being a Windows

Dave, Forgot to mention … I do see the LEDs on the interface flicker when the command is issued. The CAB Bus flickers a few more times more until the timeout occurs. The LED on the PCP is on, but I

Ken, When using the Tree editor, selecting a conditional row, a variable row or an action row enables the Move Up/Down buttons at the bottom. Found it: Variable reorder is disabled in mixed mode. The

Dave, Found “Single CV Programmer” and attempted to do a direct read on CV 1, but a timeout keeps occurring. This is what I have been experiencing a lot. I have provided the log via the Notepad

Hi Code sorted Basically I have put a sensor connected to the district cutout via an opto-coupler, this goes active when the track power is cut due to a derailment. this event on CBUS is used to

I just tried the tree. Didn't feel comfortable. I don't see any reorder option there either. I've got a number of mixed mode logic and the order helps a lot in keeping the (()) grouping right. So far

Hi BillyBob, Some pretty big generalisations there. Perhaps asking the user what hardware they are using / request a simple worked example of the issue? JMRI not responding to known valid input from

Stefan and Burnell, <http://jmri.org/help/en/html/setup/Dropbox.shtml> Dave in Australia

Mike, Bob S is correct. They are for dropping replacement button icons. They are for large and small loco icons, not button icons. Dave in Australia

Ken and Kevin, OK, the naming of the menu item and the actual window differ. One is "Single CV Programmer", the other is "Simple Programmer"! Working from memory and not at a computer. Dave in

Ken, I have not seen any issues with the Conditional, Variable or Action reorder buttons. Have you tried using the Tree Conditional editor? Dave Sand

Phil, Who is looking for an "end anchor"? The panel, sections, transits, dispatcher? I assume you are talking about a Layout Editor panel. Unless there is an error in the panel, it will not need an

Great, thanks for letting us know! --SteveT

Has anyone seen this? I was doing some editing on conditionals and I've got one that doesn't enable the Reorder button. I don't see anything in the help page on why it wouldn't let me reorder the

I have a test loop using 6 Anchors making 6 blocks that when I create 3 sections containing 2 blocks. The software is looking for an additional anchor. Do I need to add an End Anchor into the loop to

I was able to set the long address, but going back and trying to read it with the PowerCab, it fails. -- -splasher in somd

Working with a more recent version of JMRI is always better, 4.11 is quite old now. I believe the latest Production version is 4.18. I have had few issues with using the test versions, currently at